Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheel arch flares

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 46
Joined: Fri Jul 09, 2004 9:02 am
Location: Newcastle

Wheel arch flares

Post by burner »

I've found some generic type rubber wheel arch flares at clark rubber. anyone had any expeience with this type ? are the bushranger ones better (fit) ?
NJ 2.8ITD
2 inch lift/31x10.5
Rear shelves/second battery/Engel
Manual GPS (wife reading map)
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Plastic garden edging from Bunnings is a pretty popular source of flexi-flares; the narrower stuff (100mm?) is about $20 for a 10m roll.

Not as bling as the proper stuff...

Cheers,

Scott
Top
Posts: 46
Joined: Fri Jul 09, 2004 9:02 am
Location: Newcastle

Post by burner »

thanks scott, probably go for something with a little bling. not sure how the garden edging may effect the resale value :D

the clarke rubber ones don't fit pajero real well. fit a mates hilux sweet though. just wondering whether the bushranger ones were a better fit ?
NJ 2.8ITD
2 inch lift/31x10.5
Rear shelves/second battery/Engel
Manual GPS (wife reading map)
Top
Posts: 62
Joined: Mon May 12, 2003 8:54 pm
Location: Wollongong

Post by revnkev »

I have the Bushranger flexy flares and they fit well,
they have a spring steel wire that you thread through
the outer edge once they are on,which stops the
edge from drooping but is a PITA to thread .
I'm happy with mine so far :)
95 GLX LWB 2.8lt ITD Pajero
Custom Rear Bar & Rockslides
33x12.5 MTZ's ,TJM XGS shocks,Rear Airbags
Top
Posts: 56
Joined: Sun May 23, 2004 12:54 pm
Location: Ohio, USA

Post by MontyMcV »

How is the garden edging attached? Just fit it around and use scews and washers? Can it be done without seeing the screws?
FSMs at http://www.mitsubishilinks.com
1) 00 3.5 SOHC, AT, stock for now
2) 95 LS,5-spd,3.0 24V,SR rear locker
3) 87 SWB 2.6L Turbo, I/C, 2.85s, LSD/LSD
4) 03 20th Anniv, hers, 22k miles!
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 11 guests