Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Warn 8274-50

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 207
Joined: Wed Dec 04, 2002 8:45 am
Location: Over there

Contact:
Contact Bodge

Warn 8274-50

Post by Bodge »

Has anyone wired up an in-cab switch for a 5 pin 8274-50?

:cry: - I need a wiring diagram!

I have a diagram for a 3 pin but the extra two wires have thrown me :roll: [didn't take much]
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Is this of any use to you?

http://members.optushome.com.au/dturner ... 20diag.txt
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 18
Joined: Mon Apr 07, 2003 12:28 pm
Location: Melbourne Aust

Re: Warn 8274-50

Post by FIGJAM »

Bodge wrote:Has anyone wired up an in-cab switch for a 5 pin 8274-50?

:cry: - I need a wiring diagram!

I have a diagram for a 3 pin but the extra two wires have thrown me :roll: [didn't take much]


I wired mine last week you need a switch with 6 connections and some 5 core trailer wire . in the box connect each wire to each connection going to the relays from the original plug on the cover. 1 wire will be Battery power, 1 wire will be earth, 1 wire will power up on in, 1 wire will power up on out and the last remaining wire needs to connect to earth when you switch in or out.

Hope this helps you.
Top
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

Post by duncan »

Any chance you could email me the diagrame for wiring the 3 pin switch as Ive just bought a older version of the high mount winch I want to keep the original box on the front but also have switching ability on the inside of the vehicle please send to jbdb@iprimus.com.au

thanks
Top
Posts: 18
Joined: Mon Apr 07, 2003 12:28 pm
Location: Melbourne Aust

Post by FIGJAM »

duncan wrote:Any chance you could email me the diagrame for wiring the 3 pin switch as Ive just bought a older version of the high mount winch I want to keep the original box on the front but also have switching ability on the inside of the vehicle please send to jbdb@iprimus.com.au

thanks


Ive got a 3 pin high mount on the missus rig, connect 1 wire to all the connections on the relay cover if you check the wires with a multimeter you will have 12V (batt) power on one, one for in and the other for out.
Connect these to your two wayswitch Jobbie done. 8)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest