Hi 2 all you ROO owners, I have a 92 V6 short wheel base jackaroo and I have oil leaking from the rear bottom of the "GEAR CONTROL BOX ASSEMBLY " Looks like there is a little hole (vent) in the bottom.
Has any one come across this problem?
Thanks 2 all.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gear control box assembly
Moderator: Moderators
Hi Roo1,
Always great to find others with exactly the same vehicle. As you may have realised there are not a lot of them around. So have you done any modifications to your Jack? Any pics?
As for your problem, I have the same thing on mine. Had a look in the manual and it doesnt go into a lot of detail on this. I dont see it as anything to worry about. Probably some sort of overflow. This means though that you probably would want to consider the possiblity of water entering during deep water crossings.
Cheers,
Noel
Always great to find others with exactly the same vehicle. As you may have realised there are not a lot of them around. So have you done any modifications to your Jack? Any pics?
As for your problem, I have the same thing on mine. Had a look in the manual and it doesnt go into a lot of detail on this. I dont see it as anything to worry about. Probably some sort of overflow. This means though that you probably would want to consider the possiblity of water entering during deep water crossings.
Cheers,
Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
pics
no worries,
She's raised only 30mm, rear springs and wound up front,
The rest you can see,
Which manual do you have Noel ?
Spot-yu
Brad.
She's raised only 30mm, rear springs and wound up front,
The rest you can see,
Which manual do you have Noel ?
Spot-yu
Brad.
You do not have the required permissions to view the files attached to this post.
Wow! When I said exactly the same vehicle I didnt think it would be that similar. 
Is yours the base model 5sp manual Jackaroo like mine or a higher end one? Where do you go 4x4ing? Your pics look like it might be Mundaring???
Noticed that you also have some sort of flares on your guards. What sort are they? I cant quite make them out...
As for the manual, check out this thread:
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=8714
Here's mine to show the similarities:
Cheers,
Noel
Is yours the base model 5sp manual Jackaroo like mine or a higher end one? Where do you go 4x4ing? Your pics look like it might be Mundaring???
Noticed that you also have some sort of flares on your guards. What sort are they? I cant quite make them out...
As for the manual, check out this thread:
http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=8714
Here's mine to show the similarities:
Cheers,
Noel
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
Yep, Same as yours, and the pics were taken in Glen Forrest, this is where we live, (the begining of the power line track) Next door to Mundaring.
I allso brought the ISUZU WORKSHOP MANUAL.
USB SERIES 1992~ 4 volumes.
Spot-yu.
I allso brought the ISUZU WORKSHOP MANUAL.
USB SERIES 1992~ 4 volumes.
Spot-yu.
Last edited by roo1 on Sun Jun 22, 2014 12:19 am, edited 1 time in total.
Yes, And call in for a chat.
Just got back from Cervantes, caught some good fish.
Would you know where I can get a rear tailshaft, mine was moving on the
universal cups, had it fixed, and now it has play in the universal,
best replace it if possible.
Just got back from Cervantes, caught some good fish.
Would you know where I can get a rear tailshaft, mine was moving on the
universal cups, had it fixed, and now it has play in the universal,
best replace it if possible.
You do not have the required permissions to view the files attached to this post.
Awesome fish there mate! Jewy's and Baldies... Cant get much better than that. I caught a very nice Jewy off Dunsborough on a fishing charter a few weeks ago (pic attached).
Probably drifting slightly off topic now but anyway...
As for your rear diff and u/j's I dont really know of a specific place appart from your local holden dealer (Goldy's I assume) but I just had my u/j's replaced by my local garage in town. Dont know if the actual shaft would be harder to find with the swb being uncommon... Shouldnt be a problem.
Noel
Probably drifting slightly off topic now but anyway...
As for your rear diff and u/j's I dont really know of a specific place appart from your local holden dealer (Goldy's I assume) but I just had my u/j's replaced by my local garage in town. Dont know if the actual shaft would be harder to find with the swb being uncommon... Shouldnt be a problem.
Noel
You do not have the required permissions to view the files attached to this post.
1992 3.2L V6 SWB Holden Jackaroo
2008 3.0L TD Holden Rodeo S/cab Trayback
2008 3.0L TD Holden Rodeo S/cab Trayback
Who is online
Users browsing this forum: No registered users and 1 guest