Was under my car trying to remove the mud that was conjeeled under there (2 hours later) and noticed a stick was jammed up in between the actuator for the front diff and all the hoses. After i carefully removed it i found that one of the vacuum lines had broken off (see pics). Now can i glue this back on or do i need to get a new one?
-Steele
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Broken actuator on front diff.
Moderator: -Scott-
Broken actuator on front diff.
You do not have the required permissions to view the files attached to this post.
Four wheels (Driving) good, two wheels bad.
NP Pajero with added goodness..
NP Pajero with added goodness..
Real men drive in 4wd!
I wouldn't trust gluing the broken fitting back together, and I can't recognise precisely which part you've photographed. Can you pull out the actuator, then drill and insert a new fitting? Better still if you can disassemble and insert something from inside...
Good luck,
Scott
I wouldn't trust gluing the broken fitting back together, and I can't recognise precisely which part you've photographed. Can you pull out the actuator, then drill and insert a new fitting? Better still if you can disassemble and insert something from inside...
Good luck,
Scott
Who is online
Users browsing this forum: No registered users and 0 guests