Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rust/Corrosion VS Staun products

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 6
Joined: Thu Jan 27, 2005 2:28 pm
Location: Somewhere

Rust/Corrosion VS Staun products

Post by TUF105 »

Hi Guys,

As the topic suggests anyone have an opinion regarding this stuff? Does it really work as they claim?

Any recommendations to battle this?


Regards

BA
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Re: Rust/Corrosion VS Staun products

Post by GRIMACE »

Boostedastra wrote:Hi Guys,

As the topic suggests anyone have an opinion regarding this stuff? Does it really work as they claim?

Any recommendations to battle this?


Regards

BA


Rust prevention - E.R.P.S. dont get anything else.... I can say these work my father has used them on a total of 5 vehicles - 3 of which went over to north stradbroke island atleast 3 times a week.
Posts: 6
Joined: Thu Jan 27, 2005 2:28 pm
Location: Somewhere

Post by TUF105 »

ERPS?

Is this what was banned in the states? I heard that there was a court case that prohibited this type of rust proofing as it was proved that it didn't work?

Have i opened a can of worms?

BA
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

I use the staun stuff to rustproof my 40. I didnt really want to spend the money on a serious solution and so far I'm on my second bottle (at $50 each). I find that its ok, have spent 2 weeks on fraser, done some recent mud work so theres always sand around.

It leaves a greasey film on the surface of where you apply it so you might find that you get greasy hands opening door handles etc.

Its ok as far as surface rust goes but I have noticed a few other spots come up. YOu really need to apply this stuff regularly (fortnightly)? I use my massojet to apply it but I haven't yet done it with the aircompressor and water, just the water, it doesnt have the pressure to apply this properly i think.

i reckon if your serious on protecting your vehicle, then use ERPS or a professional application of fish oil (whats it called?).
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
User avatar
MEX
Posts: 122
Joined: Sun Jul 25, 2004 8:06 pm
Location: Brisbane

Post by MEX »

I CAN RECOMMEND THE E.R.P.S. SYSTEM.

I HAD IT INSTALLED ON MY VEHICLE 3 YEARS AGO AND CURRENTLY THE ONLY RUST I HAVE IS ON ISOLATED COMPONENTS (SCREWS WITH RUBBER WASHERS INTO PLASTIC INSERTS, STEERING DAMPER, SHOCKYS ETC). AFTER IT WAS INSTALLED I CRUNCHED MY REAR QUARTER PANEL DROPING OFF A ROCK AND I DELIBERATELY LEFT IT AS DAMAGED AND UNPAINTED FOR A FEW MONTHS TO SEE WHAT WOULD HAPPEN. IT DIDN'T RUST. I DRIVE THIS CAR ANYWHERE (BEACH, BUSH, MUD, CREEK CROSSINGS) AND ALTHOUGH I STILL CLEAN IT I'M NOT OVER THE TOP ABOUT IT. ON MY PREVIOUS 4B I GOT CAUGHT OUT A COUPLE OF TIMES WITH MUD RUSTING OUT LITTLE SPOTS WHERE I HADN'T CLEANED PROPERLY. THIS DOSN'T HAPPEN NOW.

MEX :)
SWB MAVERICK
Posts: 391
Joined: Tue Oct 26, 2004 6:50 pm
Location: brissy

price

Post by benjamin78au »

any ideas on what an erps system is worth ? went local guy and got told no change out of a grand

bj
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Re: price

Post by GRIMACE »

benjamin78au wrote:any ideas on what an erps system is worth ? went local guy and got told no change out of a grand

bj



:shock: well i not saying prices as my father obviously gets a deal for his tour vehicles, he gets the unit fitted to them by a guy who lives on north stardbroke island... My mothers brand spanker 100s is bein picked up from him today and I have no doubt it will remain failry rust free for the next 10 years no worries ;)

E.R.P.S. to date has been the only unit my father has tried but he was told of other units that did absolutely nuthing, he researched a fair bit b4 his purchase (he always reasearches everything to each and every minor detail) and so far his research has paid off :lol:
I am even considering puting one on my range rover thast already showing signs of rust under the sills....

Sum installation places charge alot and try to sell you and install three times as many couplers as you need (couplers are $60-$90 each :shock: ) so be wary if they say you need 10 as you prob only need 4 :roll: that where i think sum people have been quoted way over $1000.
User avatar
MEX
Posts: 122
Joined: Sun Jul 25, 2004 8:06 pm
Location: Brisbane

Post by MEX »

I GOT WHAT THEY CALL "THE BEACH PACK" WHICH FOR A SWB INVOLVES 6 CONNECTION PADS AND THE UNIT ITSELF. IT WAS INSTALLED FOR $450 OR $550 (I CAN'T REMEMBER WHICH).

A GRAND SOUNDS EXCESSIVE. :shock:

MEX :)
SWB MAVERICK
Posts: 6
Joined: Thu Jan 27, 2005 2:28 pm
Location: Somewhere

Post by TUF105 »

how many couplers are required for 100s LC?

BA
User avatar
MEX
Posts: 122
Joined: Sun Jul 25, 2004 8:06 pm
Location: Brisbane

Post by MEX »

IF I REMEMBER CORRECTLY (YOU SHOULD CHECK. PHONE YOUR LOCAL ARB STORE) THE STANDARD IS 4 PADS FOR A SWB (6 FOR BEACH PACK) AND 6 PADS FOR LWB (8 FOR BEACH PACK).

MEX :)
SWB MAVERICK
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Post by Utemad »

I haven't tried electronic rust preventer. I have however had my Rodeo chemically rust proofed. I also spray lanolin around underneath before any beach trips. I have absolutely zilch rust. However i have heard that Isuzu panels are made from galvinised sheet or something.

I'd be hesitant to spend the extra on an electronic system when the 'old-fashioned' way has been so good to me.

My Rodeo is 7.5 years old and has been a coastal car all its life. Many beach trips etc.
Land Rover Discovery series 1 V8
Posts: 391
Joined: Tue Oct 26, 2004 6:50 pm
Location: brissy

fitting and where

Post by benjamin78au »

any where i can buy them and can i fit them myself, i mean , i own a suzuki so 4 or 6 should be plenty. they just connect to the body, right.

from what i see it won't interferr with the ecu or radios or stereo
User avatar
Gee
Posts: 573
Joined: Sat Dec 11, 2004 11:20 am
Location: probably somewhere that blows...

Post by Gee »

You can fit the system yourself- but you will miss out on the warranty provided when professionally installed. Autobarn supply and fit them as well as some tyre retailers like Bridgestone Tyre Power.
Meh...
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests