Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

spring retainers

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 81
Joined: Sat Jan 29, 2005 12:39 pm

spring retainers

Post by yella_rangie »

i was wondering if anyone has had any experience with rear spring retainers? i was going to go relocation cones but after a bit of research dont really want to listen to all than banging and farting in the back...has anyone made their own version of a spring retainer?
Top
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Post by Davidh »

4 BIG cable ties on the top perches seems to work well for me!
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

Davidh wrote:4 BIG cable ties on the top perches seems to work well for me!


i got about 8 upthere :lol:
and a small cup style retainer on the bottom :D
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

heavy duty hose clamps work for me... but you will need to beef up the lower reatiners.. with only 2 hose clamps I have managed to bend the lower factory retainers into a " U " ;)
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

landy_man wrote:heavy duty hose clamps work for me... but you will need to beef up the lower reatiners.. with only 2 hose clamps I have managed to bend the lower factory retainers into a " U " ;)



hey so it is common :lol:
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

yeah... they are only like 2 or 3mm steel...
quite fine if all they are doing is holding the springs in.... but once you start stretching the spring, they let go pretty quick
Top
Posts: 62
Joined: Fri Oct 29, 2004 9:04 pm

Post by malibu9 »

I had to make a new one today after the weekend. I used 5mm thick steel and just made the same configuration as the originals. I use hose clamps at the top of my springs so they don't dislocate and I haven't had a problem with them coming away from the top of the perch.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest