Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 link suspension joints

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

4 link suspension joints

Post by Ruggers »

im building a mud racer and putting 55 seires diffs under a rangie chassis and doing a 3/4/5 link style susppension on it.
what do people use for mounts i was think flat plat around 5mm and some tube to suit a poly bushe. what have other people done or ideas thanks guys
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

why not keep the stock rangie arms and redo the mounts on the diff housings? similar principle to the patrol diff swap into rangies. i didn't think you'd need 4 and 5 links for mudracing? but i could be very wrong.
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

thats what i probably will do it just that i have a bare chassis and cruiser diffs im not running leafs and was thinking doing a 4 link style suspenion
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 818
Joined: Thu Nov 20, 2003 9:06 am
Location: Bathurst NSW

Post by professor »

like this?????

this gear is good if you want the gear to last

www.dobbinengineering.com/
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 7 guests