Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Swaybar removal = no change!

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 96
Joined: Sat Nov 20, 2004 2:38 pm
Location: Newcastle

Swaybar removal = no change!

Post by Syzygy »

gained all of about 7mm on the down wheel.

probably had the tape measure in a different spot...

i'm not complaining that my swaybar doesn't limit anything, but am wondering why other bunderas gain from it and i dont. could it just be very worn bushes?

everything is stock.
You do not have the required permissions to view the files attached to this post.
Top
Posts: 70
Joined: Sun Aug 08, 2004 2:51 pm
Location: Melbourne

Post by alrob »

doesn't the swaybar just hold the axles and body on the same plane? therefore, disconnecting it won't give more travel as such, rather let the axles move more independantly in relation to the body?
Top
Posts: 137
Joined: Wed Jun 09, 2004 9:21 am
Location: Melbourne - Eastern Burbs.

Contact:
Contact LilBlkDuck

Post by LilBlkDuck »

Disconnect the sway bar on something with a bit of lift and it makes all the difference.
Cant get what aint there in the first place.
Lifted, locked, loaded, reduced, rolled, and rowed
FZJ80, 1FZ-FE, A442F, 37's & 5.29's.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

check your shocks aren't limiting travel now
Spit my last breath
Top
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

I want to remove my s/bar when I get mine lifted but only if the benifits are there.
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

bad_religion_au wrote:check your shocks aren't limiting travel now


This will most likely be the problem.
www.bolsys.com.au
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

And bind in the radius arm bushes, can you get slotted bushes for 70s and 80s ?.
J Top
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

alrob wrote:doesn't the swaybar just hold the axles and body on the same plane? therefore, disconnecting it won't give more travel as such, rather let the axles move more independantly in relation to the body?


You should go for a drive in Beebees truck with and then without swaybars. ;)
Top
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Contact:
Contact -Nemesis-

Post by -Nemesis- »

bad_religion_au wrote:check your shocks aren't limiting travel now


Exactly what i was about to say. My old Pedders shocks limited my rear travel, but still got better without sway bars.
With the right size shocks, and no swatbar it now out flexes the coils nearly....

(4Runner though)
Top
Posts: 96
Joined: Sat Nov 20, 2004 2:38 pm
Location: Newcastle

Post by Syzygy »

yeah i checked the shocks today, and they go close to limiting it but they aren't.

took one off and got another 10mm wheel drop, but then connected it back up with the wheel still down and it stayed at that height. It did seem to be pretty much at its limit.

maybe toyota designed everything to max out at the same time...

putting it down to bushes i think.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests