new donk is in the hole, thermo or not to thermo?

Post by **christover1** » Sun Apr 27, 2003 5:12 pm

motor is in, bolted to the g'box and engine mounts. fitted all the wiring and plumbing, but a stubborn bolt in starter took too long, so will finish radiator and stuff tuesday(too much on tomorrow..) :(
am considering the fors and againsts fer thermo fan, as this donk was designed with thermo in mind, and my fan wont fit. I can make fan fit, if I have too, thinkin still...got to put ignition back together, and reset timing, and rocker clearances(disturbed them for the cam change), christover

Post by **bigsteve** » Mon Apr 28, 2003 12:48 am

Hey Chris, If you are after a thermo I have one, it wouldn't fit my radiator, So I went with a smaller one, it needs a fuse & relay, its yours for the right price

Post by **christover1** » Mon Apr 28, 2003 9:47 am

bigsteve wrote:Hey Chris, If you are after a thermo I have one, it wouldn't fit my radiator, So I went with a smaller one, it needs a fuse & relay, its yours for the right price

ok, yep, thanks, assuming it will fit mine? I will give it a try. am thinking swift fans shou;d werk, maybe, too. davies craig seems to be a popular choice, christover.

Post by **bigsteve** » Mon Apr 28, 2003 11:34 am

Let me know if you are going on the club trip this sunday (4/5) and I will bring it along.

Stevo

Outer Limits 4x4 Board

new donk is in the hole, thermo or not to thermo?

new donk is in the hole, thermo or not to thermo?

Who is online