Thanks
Ben
P.S. I'm going to say 'Just put it on LPG' to save someone else the trouble
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Pollution gear for 9/74
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Pollution gear for 9/74
I'm wondering what pollution gear I am requried to have on my 9/74 petrol passenger car. I have positive crank case ventilation and automatic choke. Do I need EGR and charcoal cannister? Are there any good references on the topic? Where can I get a copy of the relevant ADRs?
Thanks
Ben
P.S. I'm going to say 'Just put it on LPG' to save someone else the trouble
Thanks
Ben
P.S. I'm going to say 'Just put it on LPG' to save someone else the trouble
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
NJ SWB wrote:I had a March 1974 petrol with PCV and automatic choke.
My mother's 1975 model had charcoal cannister, but I don't think it had EGR.
I think ADR27A was the big one - what's on your compliance plate?
Good info. I'll check the plate. Did your 74 have a hot air stove?
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
I'm not sure what that is. If you mean a warm air intake coming from the exhaust manifold, I really don't recall. It had a Weber and extractors almost as soon as I bought it, so I don't remember the original configuration.
I don't think the '75 had that arrangement either, but I could be wrong.
If a "hot air stove" was something completely different, you'll have to explain it to me.
Scott.
I don't think the '75 had that arrangement either, but I could be wrong.
If a "hot air stove" was something completely different, you'll have to explain it to me.
Scott.
1986 was the introduction of unleaded petrol. Well before that we had emissions regulations which brought us the joys of
There's probably others I've missed, but unleaded petrol wasn't the start of it...
Cheers,
Scott
- Positive Crankcase Ventilation - feed oily crankcase fumes back into the air intake.
Automatic chokes - can't trust people to use a manual choke properly.
Carbon Cannisters - capture fumes from the fuel tank and feed them into the intake.
EGR valves - recycle some exhaust gas to reduce the amount of oxygen in the cylinder, to reduce NOX emissions.
Air pumps - inject air into the exhaust for some strange reason
Skinny little exhausts - create back pressure and force the engine to warm up quickly.
There's probably others I've missed, but unleaded petrol wasn't the start of it...
Cheers,
Scott
NJ SWB wrote:I'm not sure what that is. If you mean a warm air intake coming from the exhaust manifold, I really don't recall. It had a Weber and extractors almost as soon as I bought it, so I don't remember the original configuration.
I don't think the '75 had that arrangement either, but I could be wrong.
If a "hot air stove" was something completely different, you'll have to explain it to me.
Scott.
warm air intake coming from the exhaust manifold = hot air stove.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Who is online
Users browsing this forum: No registered users and 6 guests