Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diesel hard to start
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Diesel hard to start
Hi all
I am having trouble starting my car in the mornings, or when it has been left for long periods of time (like more then 7 or so hours).
It turns over fine, but a lot of times before it fires. I can then turn it on and off as I please. I turn it over in periods of maybe 15 or so cranks, and I have to do this 4 or 5 times before it fires. Each time with a small break in between.
I am thinking either glow plugs or fuel pressure being lost.
Its a 2.4 litre (2L) motor from my 4Runner.
What do you think?
Stew
I am having trouble starting my car in the mornings, or when it has been left for long periods of time (like more then 7 or so hours).
It turns over fine, but a lot of times before it fires. I can then turn it on and off as I please. I turn it over in periods of maybe 15 or so cranks, and I have to do this 4 or 5 times before it fires. Each time with a small break in between.
I am thinking either glow plugs or fuel pressure being lost.
Its a 2.4 litre (2L) motor from my 4Runner.
What do you think?
Stew
Its probably the ambient temperature within the combustion chambers not being compatable with the regulated air/fuel charge being ingested into aforementioned combustion chambers. Common symptoms of this condition are - It turns over fine, but a lot of times before it fires. I can then turn it on and off as I please. I turn it over in periods of maybe 15 or so cranks, and I have to do this 4 or 5 times before it fires. Each time with a small break in between. Try-
NEW GLOW PLUGS
NEW GLOW PLUGS
Mud makes excellent toothpaste.
BundyRumandCoke wrote:Its probably the ambient temperature within the combustion chambers not being compatable with the regulated air/fuel charge being ingested into aforementioned combustion chambers. Common symptoms of this condition are - It turns over fine, but a lot of times before it fires. I can then turn it on and off as I please. I turn it over in periods of maybe 15 or so cranks, and I have to do this 4 or 5 times before it fires. Each time with a small break in between. Try-
NEW GLOW PLUGS
Blinker Fluid?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
pegasus wrote:Are you sure its not a fuel pressure problem?
As others have said ... most likely GLOW PLUGS
It could possibly be a problem with the injectors (i.e. - stuffed nozzles/bad spray pattern/popoff pressures) but this would be noticeable by bad/rough running when cold and maybe at other times, and probably excessive smoking.
If the injector pump wasn't delivering enough pressure then it would be down on power, not just be hard to start.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
to test glow plugs - a diesel mechanic mate of my old mans (rebuilt my 2L) showed me a trick
pull out the glow plug - get a length of wire and connect that to the glow plug and the positive on the battery - place a small amount of oil on the other end of the glow plug and then earth it on the negative terminal - the oil will smoke almost instantaneously (sp?)
pull out the glow plug - get a length of wire and connect that to the glow plug and the positive on the battery - place a small amount of oil on the other end of the glow plug and then earth it on the negative terminal - the oil will smoke almost instantaneously (sp?)
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Like us and follow on facebook for up to date information of what we are working on and great random specials!
Custom Parts & Fabrication!
Ph: 0417 708 598
Just as easy it to use a multimeter and check the resistance of the plug, it should be 0.
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Could be a couple of things first run a cable of very large diameter from your positive terminal to the aluminimum strip that runs across the top of your glow plugs useing welding gloves hold it conected for about a count of 20 then try to start the car if it starts its bad conections to your glow plugs pull all the conections apart and put some ZINC OXIDE GREASE on all the conections its what the auto sparks use
If it still dosent want to start check the resistance of your glow plugs if there originals probable replace them there not that expensive just make sure you get the right voltage ones for your car as 60 series ones have 3 different voltages depending on the year
Lastly you didnt say if once you get it started it can be started easily for the next couple of times if so on top of your injector pump are valves that hold the fuel in the injector lines at high presure if they are leaking then it takes time at start up to build up enough pressure to start the car it will run at first like a petrol with a miss fire untill all the air is bled from the system
Just some info from a back yard mechanic whos had these sorts of problem before would suggest you get the greas and pull every connection apart on your car and re grease will save you alot of money in the long run if your playing in mud and corosive enviroment
If it still dosent want to start check the resistance of your glow plugs if there originals probable replace them there not that expensive just make sure you get the right voltage ones for your car as 60 series ones have 3 different voltages depending on the year
Lastly you didnt say if once you get it started it can be started easily for the next couple of times if so on top of your injector pump are valves that hold the fuel in the injector lines at high presure if they are leaking then it takes time at start up to build up enough pressure to start the car it will run at first like a petrol with a miss fire untill all the air is bled from the system
Just some info from a back yard mechanic whos had these sorts of problem before would suggest you get the greas and pull every connection apart on your car and re grease will save you alot of money in the long run if your playing in mud and corosive enviroment
robbie wrote:ToNkA wrote:Blinker Fluid?
tonka, have you got any spare blinker fluid? i may need some
Have rang Toyota spares about blinker fluid... It's on backorder for about 6-8 weeks. Seems that the blinker fluid factory (only one in Japan) has cut production due to a shortage of raw material.......
Blinker fluid.....
Who is online
Users browsing this forum: No registered users and 14 guests