Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series wiring.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

80 series wiring.

Post by Chucky »

I am trying to find a earth in my elec. system and I seemed to have found it. However I found a black box with two wires going into it that go to the pos. terminal of the starter battery and two that go out into the wiring loom. The box has some writing on it but it is too faded to read. Would this box hold the fusable links?
After I fixed one earth, it was on my rear flood light that hangs off my spare wheel out the back, I still have a current draw of 0.4 amps on the starter battery with the igintion off. Would the digi clock, memory for the stereo and radios draw about this much current?

Any info would help.

Cheers
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Hi
The black box is probably a cut out for an alarm....cant say about the v/d 0.4 amps is 0.4 x 12 = watts...or about 5 watts...that would probably be right.
Andrew
Posts: 4
Joined: Thu Oct 30, 2003 6:11 pm
Location: Queensland, AUS

Post by hefty_merv »

A pic is worth a thousand words, would be able to maybe identify it.

Cheers
Merv
Cheers
Merv

[url=http://www.hefty-merv.com/landcruiser.html]'93 Diesel Cruiser[/url]

Goody!! Goody!! Yum!! Yum!!!
www.hefty-merv.com
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests