Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

OH OH: Chev Revving and dying

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 65
Joined: Wed Oct 23, 2002 7:45 pm
Location: Blackwater

OH OH: Chev Revving and dying

Post by TOYrantula »

Alrite...got BIG probs....help you guys can help :D

Got car running PERFECTLY, nice and responsive and everything, all up am running bout 36 deg advance, and checked and adjusted valves to make sure they werent riding.

Now, the problem :?
Car starts and idles fine. Quickly rev it with no load it goes straight up. Rev it slowly and it dies. As in it splutters and coughs. Revving under load produces same problem, will be driving down street and she'll miss and carry-on.

I have checked all the mechanically things, and all is fine. Thought blocked jets, but is not.
Came to conclusion, it could be an electrical problem :?: Maybe coil packing it in?? Any ideas :?:
Don't let you mind wander...it is too little to be out there by itself.
Top
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

what carburetta you running ?
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Top
Posts: 65
Joined: Wed Oct 23, 2002 7:45 pm
Location: Blackwater

Post by TOYrantula »

Am running a 600 Holley, and HEI dizzy with electronic ignition.
Is not the carby. That is what I thought it was at first, blocked jets, but isnt.
Don't let you mind wander...it is too little to be out there by itself.
Top
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

had a back fire recently ?

if so.. (it's wortht he check anyways)
check the power valve in it isn't shagged

secondly you might have the wrong valve setting on the power valve

try a "65"
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Top
Posts: 428
Joined: Tue Oct 22, 2002 8:26 am
Location: The Sovereign Nation of Sealabia

Post by 2car »

Idle mixture could be too lean. When you stomp it, the accelerator pump will compensate for the lean condition.
74 FJ40, 307, Hilux DBC, 35 Claws, welded rear.

'''_ ______
'/|_[_____]__
|?[_L/-\_|o=o|_
?:__;-?__-,==,_
()_)O()_)O== )_)
Top
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

Maybe power valve or accelerator pump diaphragm is u\s or is'nt adjusted properly.

I'm leaning towards power valve, just havin a look in my Holly funnel book.. :P :P :P
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

my mates 3Y powered beast was doing this, replaced the carby with a new one

problem solved
hands and mums dont count!!!
Top
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Contact:
Contact big red

Post by big red »

had the same problem on a holly on my 192 EH [500 4 barrel]
i ended up putting bigger jets in it and all was ok [ jets too suit 302 ]
It would accellerate hard and then sort of cut off until revs dropped then accellerate hard again, could not cruise in it, only went flatout .
shane
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 39 guests