Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front End Rattle

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 61
Joined: Fri Apr 15, 2005 5:57 am
Location: Canberra, Australia

Front End Rattle

Post by chev28 »

Has anybody heard of this?

If I am running along a forest road in 4H (ie hubs locked and 4H engaged) I get a strange rattle everytime I come off the power or get on the power and the noise lasts for about 3-4 seconds. It is not really a grinding noise, it just sounds like something is not engaging for a moment. After a few seconds, the noise goes. Obviously, if I am constanlty on the power, there is no noise.

I have an f80 petrol with powershift.

I can't quite tell if this is the txfr, front diff (ie backlash) or even hubs. Has anyone had this before?

I would appreciate any advice. Thanks
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Post by rOd »

front drive shaft uni's?????
Dont expect mere proof to sway my opinion.
Posts: 165
Joined: Tue Oct 12, 2004 8:33 pm
Location: clontarf, qld

Post by inka »

tend to agree ;)
sounds like a clanging noise??
rockstock gq patrol
Posts: 25
Joined: Sun Feb 27, 2005 9:49 pm
Location: Logan, Qld

Post by jamesbeam »

I thought that my wheel bearings were on their way out in the front passengers side of mine. Have now found out after some investigation that the pitman arm is shagged. It makes the noise under load. The other thing that is causing me grief is a gearbox mount I think. It twists up really bad of road.
When I grow up I want to be a Monster Truck.
Posts: 61
Joined: Fri Apr 15, 2005 5:57 am
Location: Canberra, Australia

Post by chev28 »

Thanks for the tips.

I had a play with the uni joints and there doesn't seem to be any unusual movement (using a screwdriver to test).

The noise is more like a rumble and sounds like something is not aligned for a short moment. I might have a look at the mounts and arms as suggested but any other tips would be appreciated also.

Thanks
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Exhaust hitting on the body somewhere???
David
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests