Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ADR's and Tyre and Rim Association Manual

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

ADR's and Tyre and Rim Association Manual

Post by cbr »

Any one know where you can get the ADR's and Tyre and Rim Association Manual online??

Chris.
Top
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

Don't know online but any tyre shop will have a copy you can look at.

If its any use, I can guarantee it will say that for 33 or 35x12.5 you must have a rim at least 8.5in wide
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

The ADR's are not availiable online, but the disc is cheap & you can order it from DOTARS.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

V8 Middy wrote:If its any use, I can guarantee it will say that for 33 or 35x12.5 you must have a rim at least 8.5in wide


Isnt actually up to the Tire manufacturers to recommend what size rim for the tire?

EG: Engineer in Melb has letter from a tire company saying its "recommended" 8inch for 35x12.5's and Wendle had a letter from Mickey Thompson stating that Claws were ok on 8's.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

ive got a copy of the Tyre and Rim Association Manual sitting infront of me

what did you want to know?
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

bogged wrote:
Isnt actually up to the Tire manufacturers to recommend what size rim for the tire?

.


Nope, thats why we have a tyre & rim manual.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

mkpatrol wrote:Nope, thats why we have a tyre & rim manual.

so what is the tire manufacturers recommended rim size actually for? Warm and fuzzy?
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

bogged wrote:
mkpatrol wrote:Nope, thats why we have a tyre & rim manual.

so what is the tire manufacturers recommended rim size actually for? Warm and fuzzy?



It is a recommendation of the tyre & rim COMBINATION which best suits the vehicle in question.

They are still limited to selecting the right tyres to the rims, no good the trying to fit 33's to 6 inch rims.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

mkpatrol wrote:It is a recommendation of the tyre & rim COMBINATION which best suits the vehicle in question.

They are still limited to selecting the right tyres to the rims, no good the trying to fit 33's to 6 inch rims.

sorry, thought you were saying tire to rim, not to car...
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

bogged wrote:
mkpatrol wrote:It is a recommendation of the tyre & rim COMBINATION which best suits the vehicle in question.

They are still limited to selecting the right tyres to the rims, no good the trying to fit 33's to 6 inch rims.

sorry, thought you were saying tire to rim, not to car...



No worries
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Well i had 35x12.5 approved on 8" rims got a phone call and was told they wudnt approve me final mod forms even tho ive done a lane change test brake test etc etc etc.
Ended up telling me i had to go down to a 33x10.5 if i wantd final approval and the forms .
I said if they pay for the new tyre and rims then maybe but then id have to change ratios and all up 4k they wud have to pay or id go above and seek legal advise as they already approved on 8" rims and the pro comp xterrains are rated for 8" rim but they refused .
Ya cant get a 8.5" rim off the shelf couldnt find a 9" of the shelf ended up ringing the guy back and he said ok he will approve 10" rims so i had to go buy 10" rims .
Just hope no1 changes anymore stuff kus its startin to cost 2 much .
will be goin the pitts soon so hope they approve it all.
A guy i know went last week and they refused to inspect anymore when they saw he had 8" rims with 35x12.5s.
His mate went thru 6wks ago and got approval with 8" rims :roll: .
I was also told that if i travel inerstate with my truck having 35s i be taken of the road and illegal in all states as the new rules are being introduced as a blanket accross aus dunno if this is true but i wudnt drive that far anyway but is something else thats a piss off
chow
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

bulldogy wrote:I said if they pay for the new tyre and rims then maybe but then id have to change ratios and all up 4k they wud have to pay or id go above and seek legal advise as they already approved on 8" rims and the pro comp xterrains are rated for 8" rim but they refused .
so what did the legal advice say?

[/quote]Ya cant get a 8.5" rim off the shelf couldnt find a 9" of the shelf ended up ringing the guy back and he said ok he will approve 10" rims so i had to go buy 10" rims .[/quote]
What state is this in?
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

bogged wrote:
bulldogy wrote:I said if they pay for the new tyre and rims then maybe but then id have to change ratios and all up 4k they wud have to pay or id go above and seek legal advise as they already approved on 8" rims and the pro comp xterrains are rated for 8" rim but they refused .
so what did the legal advice say?

Ya cant get a 8.5" rim off the shelf couldnt find a 9" of the shelf ended up ringing the guy back and he said ok he will approve 10" rims so i had to go buy 10" rims .[/quote]
What state is this in?[/quote]


Victoria :finger:
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

mkpatrol wrote:Victoria :finger:

so you can get 10's approved in Vic? Me calls horse poo, shedguy tried for ages on his troopy, as did TB on his GQ shorty....

... but then again this dude got assholed, and his mate got thru with same setup.. how can you win...
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

bogged wrote:
mkpatrol wrote:Victoria :finger:

so you can get 10's approved in Vic? Me calls horse poo, shedguy tried for ages on his troopy, as did TB on his GQ shorty....

... but then again this dude got assholed, and his mate got thru with same setup.. how can you win...


I was only joking with that one Bogged, I dont really know where he is :?
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

WA :D
Legal advise is thru a freind and they said if i had been given permisson for 8" rim then within the laws i could run any tyre that is allowed on a 8" rim .
Basicaly what the transport guy said was they cant accept liability for the tyre and rims because the tyre and rim association say ya need a 8.5" for 12.5" tyres.
So i could have gone and argued the fact pro comp are rated for 8" but if i ever went BFG or another brand then id have to get more rims any way .
The guy was freindly and helpfull he just didnt wanna be the 1 to get in the shit if my tyres rolled of te rims i suppose hes doin his job.
I could have got rims made but $$$$ .
Im glad he approved the 10" rims for me tho
Last edited by bulldogy on Mon May 02, 2005 11:23 am, edited 1 time in total.
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

bulldogy wrote:WA :D
Legal advise is thru a freind and they said if i had been given permisson for 8" rim then within the laws i could run any tyre that is allowed on a 8" rim .



Id be careful with that advice as the usually the engineer will approve the wheels & tyres as a combination & you will be restricted to that, I have never seen an engineering certificate which approves just the rims with open tyres.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

Well any tyre thats 35x12.5 thats is quoted for the 8" rim.
Thats what they are engineeerd for did the lane change test on etc etc.
it is getn damn hard
from what i have herd they will accept mods in total upto 150mm eg 2"bdy 2"susp 2" tyre in a few diff combinations but all must have engineer aprroval and lane change tests brake tests etc etc .
Top
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

Shadow wrote:ive got a copy of the Tyre and Rim Association Manual sitting infront of me

what did you want to know?


Can any of the following tyres be mounted on 8" rims

33x12.50R15
33x10.50R15
LT305/70R16
LT295/75R16


Thanks
Chris.
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

33x10.5 can be mounted on 8" rims 33x12.5 cant.
From memory the 305/70r16 can .
basicaly what they are saying is that you can only exceed the rim by 4" eg 8" = 12"
8.5"=12.5
the 305s measure in inches approx 12" so thats why it can be done .
I think 315 if there is a size wud also be able to fit the rim but not sure, Because of the 16" rim.
Some1 said it too me but i cant remember
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

cbr wrote:
Shadow wrote:ive got a copy of the Tyre and Rim Association Manual sitting infront of me

what did you want to know?


Can any of the following tyres be mounted on 8" rims

33x12.50R15
33x10.50R15
LT305/70R16
LT295/75R16


Thanks
Chris.


33x12.50R15
10.00" rim

33x10.50R15
8.50" rim

LT305/70R16
LT295/75R16

those two are not listed in either "Light Truck" or "Truck - Bus" sections nor in the "Passenger Car" section.

I have a 2002 copy of the book, so maybe they have released these specs in later editions, I will ask my old man to have a look in the latest one for you, he has a copy at work (hence why i have the old one :) )
Top
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

Shadow wrote:
cbr wrote:
Shadow wrote:ive got a copy of the Tyre and Rim Association Manual sitting infront of me

what did you want to know?


Can any of the following tyres be mounted on 8" rims

33x12.50R15
33x10.50R15
LT305/70R16
LT295/75R16


Thanks
Chris.


33x12.50R15
10.00" rim

33x10.50R15
8.50" rim

LT305/70R16
LT295/75R16

those two are not listed in either "Light Truck" or "Truck - Bus" sections nor in the "Passenger Car" section.

I have a 2002 copy of the book, so maybe they have released these specs in later editions, I will ask my old man to have a look in the latest one for you, he has a copy at work (hence why i have the old one :) )


Thats fcuked.

So the manufacture (http://www.bfgoodrichtires.com/assets/pdf/all_terrain_ta_kd.pdf) recommends 7"-9" rim for 33x10.50R15 but the Tyre and Rim Association Manual recomends a 8.5" rim :?

What about 33x9.50R15??

So are there any tyres in the 33" range that can be mounted on a 8" rim??

BTW where did your old man get the manual
Thanks Chris
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

I can tell you for sure the 33x10.5 can be fitted to the 8" rim was told this last week by DPI thats the size they wantd me to drop to for a 8" rim
Top
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

Shadow wrote:
33x12.50R15
10.00" rim

33x10.50R15
8.50" rim


So is this the minimum rim width?? So on the 33x10.50R15 you can run a 10" rim??? You are more likely to peel the this tyre of a 10" rim then a 8" rim :roll:


Chris.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

lol

it lists a 31x10.5 as 8.5" rim

it also lists 10R15LT and 11R15LT as 8" rims

12R15 as 10"

under passenger car section it lists a 275/70R16 and 265/70R15 as 8"
Top
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

bulldogy wrote:I can tell you for sure the 33x10.5 can be fitted to the 8" rim was told this last week by DPI thats the size they wantd me to drop to for a 8" rim


Yea, but I want to do things by the book and not have any hassles with DPI later on. If the manual says a minimum of 8.5" and DPI say 8" then I will be using the manual. When the WA regulation become final they state that "It is very important when selecting tyres & rims that the combination complies with the tyre & Rim association manual."
So to be 100% legal you will have to follow this regulation :roll:


This is why I want to get my hands on a copy so I can be 100% certain.

Chris.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

cbr wrote:
Shadow wrote:
33x12.50R15
10.00" rim

33x10.50R15
8.50" rim


So is this the minimum rim width?? So on the 33x10.50R15 you can run a 10" rim??? You are more likely to peel the this tyre of a 10" rim then a 8" rim :roll:


Chris.


it does not list minimum/maximum, it just lists one rim width.
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

The DPI had the copy in his hand and rattled off what tyres i kud fit to the rims if ya dont belive ring the tyre and rim Association yaself then ya can get a copy from them.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

cbr wrote:Can any of the following tyres be mounted on 8" rims

33x12.50R15
33x10.50R15
LT305/70R16
LT295/75R16

what brands? Look at the websites of the tires your tinking about, they usually have recommended rim sizes for their tires.

This is what has me fucked about this "tire association manual"... All tires are different on rim sizes...
Top
User avatar
cbr
Posts: 644
Joined: Mon Oct 21, 2002 1:14 am
Location: Perth

Post by cbr »

bogged wrote:
cbr wrote:Can any of the following tyres be mounted on 8" rims

33x12.50R15
33x10.50R15
LT305/70R16
LT295/75R16

what brands? Look at the websites of the tires your tinking about, they usually have recommended rim sizes for their tires.

This is what has me ***** about this "tire association manual"... All tires are different on rim sizes...


These are BFG's All terrian
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 147 guests