Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

converting bundy to power steering.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

converting bundy to power steering.

Post by big bundy »

just thinking about converting my non-power steering bundy to power steering, from what i can tell i just need a new powersteering box and a pump/resivour and some high pressure lines? is that right

apart from that is it just a simple bolt in job or is there more to it that what could be expected?
Top
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

Ive just done mine! I did the v6 conversion and had the pump so I thought I may as well use it. Got the box off dumbdunce ages ago.

Just unbolted old steering box, bolted p/s one up and then a mobile guy came and did the lines for me.

Havent driven with it yet but will let you know in a fortnight I hope :?
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

ah sounds good mate with the lines....isn't it just a return line and a feed line? does it need to be done professionally or ya just getting lazy? :P



with the pumps....will any pump outa a 4cyl lux, fit it or does it have to be one out of a bundy?

cheers greg
Top
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

fish_man wrote:ah sounds good mate with the lines....isn't it just a return line and a feed line? does it need to be done professionally or ya just getting lazy? :P


Probably not, but he has all the tools for the job, does it there and then, no chasing fittings and sh!t. The commodore pump runs different fitting sizes to the toyota box, plus he did all new a/c lines and taps at the same time!


fish_man wrote:with the pumps....will any pump outa a 4cyl lux, fit it or does it have to be one out of a bundy?

cheers greg


Wouldn't have a clue aye! :D Mine is from a commodore.
Top
Posts: 284
Joined: Fri Mar 12, 2004 3:43 pm
Location: Rockhampton

Contact:
Contact skootin

Post by skootin »

Early 60ser box should bolt straight on.
I'm not stuck I'm over here!
Watch where you driven!!!
Top
Posts: 17
Joined: Thu Sep 02, 2004 9:43 am
Location: Vic

power stear

Post by Turbo 42 »

My bundy has a 60 series box on it
Toyota Bundera, turbo diesel, winch, 33'' BFG's,
2 inch body lift, spring lift, Rear locker.
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

60 series box is right, but beware, the 7x series box is WRONG - it turns the other way. the boxes are externally near identical so be careful!
Free air locker to the first 20 callers!
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

V8suzi, has got one for 250 bucks shipped to my door, this a resonnable price or ya reckon i could pick up a 60 series one cheaper?
bundy's suck ass
LWB patrol's are where its at!
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

price is ok, wreckers want $400 plus.
Free air locker to the first 20 callers!
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

yeah , toyta wreck near me want 395 :finger: , am getting the pump, brackets, puley off bundytime so i gots to get me some cashola now :armsup: :armsup:
bundy's suck ass
LWB patrol's are where its at!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests