fitting 33x12.5's on a 2000 IFS Hilux

[InSanE]

Hi my mate has a 2000 IFS Hilux with a 2" body lift and 32 muddys he is interested in putting on 33's just wondering what people have done to fit 33's on IFS hilux's

[+dj_hansen+]

mmm... Chop front guards, ball joint spacers and drop front x-member would enable fitting of 33"s easily... would need to change shocks and bash plate tho...


Read here for how to:
http://www.toyotasurf.asn.au/techsite/c ... ension.htm

[ausyota]

With a 2 inch body lift you will probably just need to pound the seam inside the inner guard/firewall.
You may need to trim the guards a little too.
But yeah 33s will fit quite easily on IFS.
Paul.

[V6XtraHilux]

Ausyota is right, but I havent trimmed the guards, not needed, although I am running 33x10.5 not 12.5s.

just incidently, if ur going to insure the beast with 33s, it'll require a roadworthy cert, and I have had probs getting my 33s approved. So far they wont approve for on road use due to tighter regs by RTA in NSW.

K

[V6XtraHilux]

Ausyota is right, but I havent trimmed the guards, not needed, although I am running 33x10.5 not 12.5s.

just incidently, if ur going to insure the beast with 33s, it'll require a roadworthy cert, and I have had probs getting my 33s approved. So far they wont approve for on road use due to tighter regs by RTA in NSW.

K

[Tiny]

A mate is running an 04 with 33 serengetties, they are a slightly more offset rim, and they clear everything AOK with 2" bodylift

[ausyota]

Ihave an IFS lux and I am running 33x12.5 MTRs on 8" Landcruiser offset Sunnies.
I have a 40mm bodylift and they rubbed a bit but with the aid of a big hammer they dont touch at all

I trimmed a little under 2" from my front guards right round but simply because Im planning to run bigger tyres when I SAS it and because it looks .
Paul.