The picture below is a yank truck... but i am really interested in the idea they have done on the tub... the cut down the bottom of the ass end of it.
my real question is how legal is it provided i remount the numberplate / mudflaps, and who is an engineer i can talk to just quickly about it?!?!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Legalities of Cutting Tub...
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Legalities of Cutting Tub...
You do not have the required permissions to view the files attached to this post.
I Have a Hilux, Its nothing fancy, but it gives me plenty of fun!
cant see it being any different than this
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=44824
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=44824
www.mudrhino.com.au
very true... but legalities is my main problem... this will stand out a bit more than a cut on the bottom of a wagon...
isnt it a law to have a rear bumper!
dont wanna give the police any extra reason to pull me up, will be wearing p plates as soon as october comes round :/
isnt it a law to have a rear bumper!
dont wanna give the police any extra reason to pull me up, will be wearing p plates as soon as october comes round :/
I Have a Hilux, Its nothing fancy, but it gives me plenty of fun!
I doubt there are specific rules for this. But what you would have to comply with:
Still need a bumper, (I think maximum bumper height is in the ADR's).
Lights are staying in the same place - so that is OK.
Must be no sharp edges - fold panels properly after chop.
Will probably need mudflaps - think there is also a rule on this - amount of wheel that must be covered by mudguard/mudflap.
Still need a bumper, (I think maximum bumper height is in the ADR's).
Lights are staying in the same place - so that is OK.
Must be no sharp edges - fold panels properly after chop.
Will probably need mudflaps - think there is also a rule on this - amount of wheel that must be covered by mudguard/mudflap.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
im assuming i could use a rubber piece with chain holding to position for mudflap... im sure ive seen it on a couple of tray designs...
sharp edges are sweet to fix,
just bumper... i was a lil confused as i dont think the ute came with a bumper really... was jsut tub... but i spose the bottom part served as a bumper itself...
ah well, shall try get in contact with an engineer to make sure of everything
sharp edges are sweet to fix,
just bumper... i was a lil confused as i dont think the ute came with a bumper really... was jsut tub... but i spose the bottom part served as a bumper itself...
ah well, shall try get in contact with an engineer to make sure of everything
I Have a Hilux, Its nothing fancy, but it gives me plenty of fun!
Mate got defected for various issues couple of weeks ago, not for the rear.
He chopped the back end like seen in photo, had to go back to inspection twice until they passed the vehicle for other issues, rear end was never mentioned and vehicle is passed with the tubs missiing right up to top of wheel arch and no bumper
He chopped the back end like seen in photo, had to go back to inspection twice until they passed the vehicle for other issues, rear end was never mentioned and vehicle is passed with the tubs missiing right up to top of wheel arch and no bumper
NF 3.0 BLK, 2.5" suspension (HD T bars, prog coils, TJM Bullbar, 31X10.5X15 Mickey T FCII & cent locking
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
In the Tech Bible there's a long list of engineers.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=11722
Can't see why you need a bumper for a ute. Most utes don't come with them.
Some up spec models like SR5 etc. do but not most of the base models.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=11722
Can't see why you need a bumper for a ute. Most utes don't come with them.
Some up spec models like SR5 etc. do but not most of the base models.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Who is online
Users browsing this forum: No registered users and 31 guests