Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Track fixes.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Track fixes.

Post by nicbeer »

Hey,

I thought it would be good to see what people have done to fix a breakage on the trail on the zooks and maybe sticky it for later.

Mine is the transfer case mount and a plastic bottle the first time and a lump of wood the next time it happened wedged into the area worked to get home.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 754
Joined: Wed Jan 21, 2004 11:57 am
Location: Tumut, NSW

Post by Barathrum »

Used the hose from the pcv valve to the airfilter, to replace a broken hose to the heater core.
Used some Selleys Knead It STEEL to repair a hole that i crunched in my fuel tank.
I used rope to hold the t-case in position when i broke a mount.
The usual amount of cable ties to hold anything and everything that had fallen off or been damaged together, lights, bumpers that sorta thing.
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

I used soap for a hole in the fuel tank. It worked well for a few weeks till I got round to getiing a new tank.
[url]http://www.vic.suzuki4wd.com/forum[/url]
Posts: 106
Joined: Sat Nov 06, 2004 6:05 pm
Location: queensland

fix

Post by jcianci »

i fixed a snapped leaf spring, just jacked it up, and put another scissor jack between the axle and the chassis. Got from mt cotton to palm beach, about a 1.30 mins drive
Posts: 193
Joined: Mon Apr 26, 2004 6:38 pm
Location: Castle Hill, Sydney

Post by 40 lover »

this wasnt in a zook... but i broke an engine mount so we just wrapped copper wire round it and reinforced it with cable ties...

... also drove around on this for like 3 months after that, and the bodgy job was still in fine working order when i replaced the mount.
DRIVE IT HARD, TOW IT HOME
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Kevlar gaffa tape T/case in place
250 Kilometer drive on collapsed wheel bearing (rear passanger)
Using leg as wheelchock after destroying gear box, then smoking brakes and not bing able to stop on long downhill .. (didn't what to run into back of tow vehicle)
drive home in front wheel drive.
Beer in raditor to plug leak
I am sure there is other dumb stuff i have donr and forgotten

Like sand in the front diff instead of oil .. Still have no idea how it got there.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 1087
Joined: Thu May 06, 2004 9:37 am
Location: Darwin N.T.

Post by SiKiD_01 »

love_mud wrote: Like sand in the front diff instead of oil ...

good trail mod if you need a lsd or locker
1995 Vitara:
stock standard


WWW.DARWIN4X4.NET
Posts: 41
Joined: Wed Apr 13, 2005 12:22 am
Location: Netherlands

Post by ed oorklep »

We fixed some broken leaf springs on a heep with D-clips we use on the end of the recovery straps :? He drove a few hundreds of km's with it and they were still in place :cool:
Posts: 2678
Joined: Fri Feb 27, 2004 2:35 pm
Location: Crestmead

Post by Doggy »

wasnt on a zook but a mate snapped his drivers side engine mount on a hilux so we used a ratchet strap to hold it over to the passenger side so it was in a more suitable spot. Worked quite well
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Mate tore his engine mount off his chassis rail in a 60. Bar through the front corssmemeber, and used tow rope to hold that in position. Worked tops.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 296
Joined: Sat May 01, 2004 11:35 am
Location: oxford new zealand

Post by tomsoffroad »

Three batteries, three sets of jumper leads and 2.5mm arc rods.
Nothing beats DC welding :finger:
Where the f#@k did that come from
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

fried my accelerator cable as it was acting as an earth cable, as i didnt have the one from battery to boyd properly attatched.
so i was going to hook up my throttle to the hot cold switch, but in the end decided on using the bonnet release through the window, worked well....
gotta love zooks.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Re: fix

Post by spamwell »

jcianci wrote:i fixed a snapped leaf spring, just jacked it up, and put another scissor jack between the axle and the chassis. Got from mt cotton to palm beach, about a 1.30 mins drive
i snapped a leaf spring at landcruiser park, it was infront of the rear diff so we reversed the springs and put a big bit of 4*4 in there and tied it all together with a ratchet strap and drove home on dirt roads for 2 and a half hours :)
Image
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 72 guests