Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front LSD, swap from rear diff??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 343
Joined: Fri Jun 18, 2004 3:25 pm
Location: Melbourne

Post by EricB »

Yeah I spoke to my mechanic and he thinks an LSD in the front sounds good.

I'll keep asking around for pricing.

Thanks
2000 GU II 4.2TD
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

Just one of those questions I have to ask the airlocker-or-nothing guys:

Seriously guys if it was such an issue with the steering do you really think they'd install LSD's in the front of 300hp front wheel drive only rally cars that hurtle through the forest inches away from trees at 200kph?
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

Its amusing some of the missguided theories of how an LSD works.

The best way to discribe it is to say that it is similar to a worn out clutch, in that as you put more an more power to the clutch, it will start to slip.

Same with the LSD, the clutch packs in a Late model Hilux diffs will handle something like 60Nm of torque before they will slip and alow one well to spin and the otherto stand still.
By shimming the clutch packs you are efectivly increasing the Torque rating of the LSD, meaning it will take more resistance on one wheel before the clutches will start slipping and that wheel stop being driven.

So there will be no loss of steering control, no sudden lock up of wheels, just slightly heavier steering with your free wheels hubs engaged.

Some one correct me if I'm wrong!!!!!!
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

Multiple types of LSD around too... they have different actuation methods.
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

EricB wrote:I rang a couple of diff places for prices on a front LSD

1 said $500

The other place said that you dont know when the LSD grabs and lose your steering. That is why most go for an air locker to have a control.

Does this sound right?


No completely untrue, my front LSD feels like an open diff but just a bit heavier, there's no surprises other than the improvement in performance :D

What you describe is what front auto lockers do, I had a lockrite in a manual steering vehicle and it was a pig, wrench the wheel out of your hands at times.
I drove another manual steer vehicle with a front detroit and it was much smoother with smaller increments as it locked and unlocked.

Taking your hand off the wheel to engage / disengage a manual locker midway up a serious stage of a hill could be hairy at times.

A front LSD also still allows the vehicle to turn in mud, none of this have to put it in 2wd to round a corner business.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 3
Joined: Thu Jun 10, 2004 1:46 am
Location: The Netherlands

Post by Rob B »

Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

He is in correct in this statement.

Limited-slip
The feature which distinguishes a limited-slip from a locker is its progressive action. It provides some degree of differential action even as power is applied until at some point it may lock up completely, depending on how it is set up. I have heard the terms "limited-slip" and "positraction" used interchangeably and I have heard other people claim there is a difference. No one has been able to explain the differences, if any, to me. The biggest difference seems to be that "Positraction" was a particular brand of limited-slip.
The Nissan limited-slip is a Salisbury-type unit consisting of a set of discs and clutches inside a housing that provide a friction coupling between the two axles. This same type of unit has also been used in E-type Jaguars and Cobras.

Note: at one time, another type of limited-slip unit, called a Gleason-Torsen, was available for the R200. At last report it is no longer available, which is a shame, because it had all the advantages of a limited-slip with none of the drawbacks. It was a very unusual design, using worm gears, worm wheels and spur gears to limit wheelspin while still providing full differential action. Like the Detroit Locker, it will not be discussed here.


An LSD will not lock up at some point. Any one with an LSD will teel you that. Besides, if an LSD did lock up completely at some point, why would we spend $$$ on Airlockers etc whan so many vehicles come with LSD as standard??
All an LSD does apply more pressure to thespider and side gears to prevent them from transfering drive to one wheel as early as would happen in an open diff. An LSD will work to the point where the forces on the two wheels are to different for the clutch packs to grip, and the will slip alowing one wheel to stand still and the other two sin.
Its hard to describe, but it opperates like an open diff, but with the clutch packs providing more resistance to over come before one wheel spins and the other stands still. As i said before, buy putting more clutch plates in , or more shims in it further increases the risitance needed to over come before one wheel will spin by its self.
Last edited by DieselBoy on Sat May 07, 2005 12:55 pm, edited 1 time in total.
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

Torsen diffs are slightly different in that they're a purely mechanical means of achieving the result a viscous (standard clutch style) LSD would.

Torsen diffs are normally used in racing applications, since you can preset a maximumproportion of torque through them - so if you want say a maximum of 6:1 torque ratio the wheel with grip will gain up to 6 times the torque of the slipping wheel.

This can help prevent breakage especially in high power applications.
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

A good point to explain LSD's to people would be

Clutch type LSD (eg most 4wd's)
http://auto.howstuffworks.com/differential8.htm

Viscous LSD (normally on FWD/AWD)
http://auto.howstuffworks.com/differential9.htm

Torsen LSD (Normally Race cars)
http://auto.howstuffworks.com/differential10.htm

Note that there are different ways to effect each type of LSD.

(except of course the Torsen LSD which is a trademarked item)
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

lsd

Post by china »

just interested, how is it on steep decents with big rocks n tight corners ?
this would be the only thing stoppn me, is it ok, just heavier or a battle? or a stupid question?
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

found a wrecker in melb who has up to 10 pathfinder lsd centres for $550 each.

maybe a few of us can get together and do a deal
Jeep Wrangler TJ

Jeep Cherokee XJ
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

just interested, how is it on steep decents with big rocks n tight corners ?
this would be the only thing stoppn me, is it ok, just heavier or a battle? or a stupid question?


On decents, well logic suggests that it would be beneficial, or at the very least un-noticeable. Tight corners, well it would not reduce your turning radious or do any of the ugly things a front locker can do, but it may make you steering heavier due to having to over come the resistance of the clutches trying to straighten the wheels, but it wouldnot make you sledge straight ahead as a locker perhaps would.
You would have to bear in mind the extent to which you would notice the effects of the LSD would depend on whether you left it standard or tinkered with it.
I'm not the best person to answer this question as i have had neither in the front, but thats just the most logical answer i can think of based on what i have seen and read.
Anyone??

Cheers,
Pete.
Posts: 1434
Joined: Sat May 22, 2004 6:44 pm
Location: stalking

Post by blackmav »

YankeeDave wrote:found a wrecker in melb who has up to 10 pathfinder lsd centres for $550 each.

maybe a few of us can get together and do a deal


I could be interested if could get it for about $500 odd landed in NSW
Short GQ, Petrol, Turbo.
GQ TD42 ute
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Re: lsd

Post by Rainbow Warrior »

china wrote:just interested, how is it on steep decents with big rocks n tight corners ?
this would be the only thing stoppn me, is it ok, just heavier or a battle? or a stupid question?


Just a bit heavier, that's all, downhill is no different to uphill or flat as far as I can tell. Mine has been tightened a lot up too.
My turning circle is still the same, I don't need to go to 2wd to go round corners like some autolockers.
Last edited by Rainbow Warrior on Sat May 07, 2005 6:05 pm, edited 2 times in total.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

blackmav wrote:
YankeeDave wrote:found a wrecker in melb who has up to 10 pathfinder lsd centres for $550 each.

maybe a few of us can get together and do a deal


I could be interested if could get it for about $500 odd landed in NSW


What a rip off!

I heard I guy in this thread could get them in NZ for $50 each :D
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

if he can get them for $50 i'll take one and give him $50 cash for his effort
Jeep Wrangler TJ

Jeep Cherokee XJ
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Very interesting read so far, its certainly got the brain cells ticking over.....

:turn-l:

might be time to wander off n visit my favorite wrecker :roll:
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

YankeeDave wrote:if he can get them for $50 i'll take one and give him $50 cash for his effort


Somehow I doubt he'll find too many if any at that price, even in NZ dollars
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

I'll put the question to the guy at "The Diff Shop" in Chch on Monday, i was just basing my logic on the fact that if he could get me an open carrier for the Safari, which are pretty rare over here, they all have the factory LSD, then a LSD terrano/Navara carrier would be about the same as they are an extremely common vehicle over here!!!!
We will see though.
I'll ask tomorrow.
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

DieselBoy wrote:I'll put the question to the guy at "The Diff Shop" in Chch on Monday, i was just basing my logic on the fact that if he could get me an open carrier for the Safari, which are pretty rare over here, they all have the factory LSD, then a LSD terrano/Navara carrier would be about the same as they are an extremely common vehicle over here!!!!
We will see though.
I'll ask tomorrow.


The Safari/MQ carrier fits in but the mounting holes for the crown wheel need to be machined larger and offset to fit.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

YankeeDave wrote:checking arb's parts list,

the navara/ pathfinder rear locker is the same part number as the GQ front. Must be a straight fit LSD into GQ front then.

i was told though that should be going for a Navara april 97 to recent and pathfinder dec 95 to recent for same as gq front.

dieselboy, if you do this soon, let me know how it goes, very interested in getting this done, seeing it's cheaper and softer on the drive train
So this would be a R50 Pathfinder??
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

Right, so I've found one for $50.
Its from a R50 Pathfinder, 1996.
The guy checked and he reckons its a 33 spline and 9 bolt crown.
Pretty sure i have a 31 spline carrier in the front??
What do ya make of all that??
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

So when are you getting me on for $50? There's a whole bunch of guys here in Aus waiting

:D
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

I gotta make sure i know exactly what I'm looking for first!!!
Some one mentioned 95 pathfinder up wards would be the correct donnor vehicle, but it appears they are not. Unless you are able to swap side gears?
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

I have a Pathfinder Navara one in mine, but not shure what model it's from Red Rover may know.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

Post by Red Rover »

From an import terrano, low kms. However if you get a second hand one remember they are know to have broken clutch packs. You find this out when you go to get it tightened. Pats had a new clutch pac k put in it cause I had it done. To be truthful, with the rear locker + limo was great. I only put the fron t locker in because I couldn't get up one hill. Now I have had the claws for a couple of years, I would have stuck with the limo, rear locker and claws
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

What I'm looking for must be from a WD21 Pathfinder/Navara/Terrano.
The one i have found is a 1996 R50 Terrano LSD.
9 Bolt crown 33 spline.
Some one here told me the front diff on mine is 31 spline.
Simplest way would be to dig out my old CV's and axles and count tham my self..................................
Posts: 75
Joined: Tue Jan 06, 2004 5:56 pm
Location: Melbourne

Post by baggers »

So how is the progress on this going just out of curiousity?
Is it as simple as a $50 part from a wrecker and a bit of work, or more like $500 and a lot of work?
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

i know $50 mark has been tossed around


but on the serious note, getting a whole new lsd centre for any car will be more than $50 unless you got some major hook ups

so imho looks more like $500-$600 for a 2nd hand lsd centre from a pathfinder that should fit with no mods. Late model that is.
Jeep Wrangler TJ

Jeep Cherokee XJ
Posts: 303
Joined: Tue Mar 22, 2005 2:47 pm
Location: NZ

Post by DieselBoy »

Well, i passed up on that LSD center i was talking about earlier, it was from a 96 R50 Terrano, which is late modle.
The spline count was wrong.
So I'm looking out for a WD22 LSD unit to see if thats what we need.

Note we need a 31 spline , 9bolt crown, and the R50 Terrano carrier was a 33 spline, 9bolt crown.
It got me wondering if it was a cheap replacement for the rear instead......... :lol:

Any how, i had the chance to drive a Hilux with a Detoit in the rear and an LSD up front.
Climbed nicly, but an absolute mongrel in the soft slippery stuff.
Thing is, unlike a front locker, you can't simply jump out and dissengage a free wheel hub if your having trouble steering..........
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests