i was under the 4by just before and noticed that the panhard rod on the back where its bolts up to the axle housing is extremely lose over the rubbers, can you get new rubbers to make it tight again?
what are they worth
matthew
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rear panhard rod
rear panhard rod
1995 land rover disco on 265 muddies
This is from an email off another forum ages ago....
"55135-01J01 top (small hole)
55135-01J10 bottom (large hole)
Should fit front and rear 1990 on.
2000 on Rears may have different top rear bush
Some pre 1989 rears have a 2 piece rear bottom bush.
Cost from Nissan $16 each
Just wind in on the vice with some slippery stuff.
Bazzle --with new panhard bushes
Just to clarify what i have just discovered, after having a look at my stock
panhard bars complete with bushes,
now, both panhard require 2 bushes,
the diff mounted one, with large hole part# 55135-01J01
and the chassis mount with small hole part# 55135-01J10
as bazzle has said, these should do both panhards depending on the year as
stated above, nissan spare parts people know nothing.
"
"55135-01J01 top (small hole)
55135-01J10 bottom (large hole)
Should fit front and rear 1990 on.
2000 on Rears may have different top rear bush
Some pre 1989 rears have a 2 piece rear bottom bush.
Cost from Nissan $16 each
Just wind in on the vice with some slippery stuff.
Bazzle --with new panhard bushes
Just to clarify what i have just discovered, after having a look at my stock
panhard bars complete with bushes,
now, both panhard require 2 bushes,
the diff mounted one, with large hole part# 55135-01J01
and the chassis mount with small hole part# 55135-01J10
as bazzle has said, these should do both panhards depending on the year as
stated above, nissan spare parts people know nothing.
"
Who is online
Users browsing this forum: No registered users and 0 guests