Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diesel Fuel filter
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Diesel Fuel filter
http://www.whitworths.com.au/main_itemd ... item=34306
and chaps often asking re these filters. Good buy here $59..
Bazzle
and chaps often asking re these filters. Good buy here $59..
Bazzle
Are these possibly the best for a diesel engine? coz u can see all the crap and water in the clear bowel at the bottom...
Any different between that and the Lucas one from 4WD systems for $110?
Do they screw into the current fitting, eg: im my 4runner, or is i complete change over with a priming pump etc..
Any different between that and the Lucas one from 4WD systems for $110?
Do they screw into the current fitting, eg: im my 4runner, or is i complete change over with a priming pump etc..
Cheers,
Dan.
[i]1996 HDJ80R[/i]
Dan.
[i]1996 HDJ80R[/i]
I think for the complete replacement from a truck spares place I paid around $100 about 12 months or more ago. It included the filter, sight glass, primer pump and 90' inlet and outlet fittings.
edit.. if the primer pump has failed and it's this type of one, you should be able to strip it and put new seals and o rings in it. Mine didn't work well a while back and I replaced the brass(?) washer cause it wasn't sealing as well as it should and it worked a treat.
edit.. if the primer pump has failed and it's this type of one, you should be able to strip it and put new seals and o rings in it. Mine didn't work well a while back and I replaced the brass(?) washer cause it wasn't sealing as well as it should and it worked a treat.
Who is online
Users browsing this forum: No registered users and 1 guest