Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Suzuki Parts

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 19
Joined: Tue Jun 07, 2005 4:09 pm
Location: Brisbane

Suzuki Parts

Post by JC83 »

I am trying to buy a Suzuki Sierra (if I can find one). I have been told that I shouldn't buy one by a few people cos there isn't any parts out there for them. Is this the case? If i were to break CV's or axels etc will i be able to get them at the wreckers.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

I think you could find parts easier for a sierra or a cruiser anywhere is the world than a cheep or similar.

They were sold just about every corner of the world. :)

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 19
Joined: Tue Jun 07, 2005 4:09 pm
Location: Brisbane

Post by JC83 »

nicbeer wrote:I think you could find parts easier for a sierra or a cruiser anywhere is the world than a cheep or similar.

They were sold just about every corner of the world. :)

cheers
I was hoping someone would say that, i was starting to get worried. Been after a sierra for years and finally decided to do it. Any info about parts and what wreckers around brissy stocks alot of them would be handy.
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

If you are running 31's or smaller and no lockers, i think you will be hard pressed to break axles and the like. With lockers it will be easier but still hard unless abusing them.

wreckers: -Mick- or one of the qld people will know.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

nicbeer wrote:If you are running 31's or smaller and no lockers, i think you will be hard pressed to break axles and the like. With lockers it will be easier but still hard unless abusing them.

wreckers: -Mick- or one of the qld people will know.

cheers
What are you implying Nic :finger:

Whoever told you that JC83 needs a boot up the coight they have no idea :D
I have owned 6 cars in my short years of all makes and the zuk is the easiest and cheapest to source parts for bar my old crappadore :lol: There's a few zook specialists like Suziworx (owned by Mud4b off here) that can get anything for sierras at killer prices and do any modifications you want too.

Geta a sierra

You can swing me an email or pm if you have lots of questions and I bet you do :D :cool:
Posts: 19
Joined: Tue Jun 07, 2005 4:09 pm
Location: Brisbane

Post by JC83 »

Well, i am glad parts are easy to get and cheap as i am looking at a sierra this afternoon. Its a 1991. Anything that i should look out for when i go and have look besides the usual (rust etc).
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

There used to ba sticky.

Buying A Suzuki - not sure where it went.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 126
Joined: Sat Feb 26, 2005 7:46 pm
Location: Melbourne

Post by 87suzi »

I can understand what they meant when they said that. I don't reckon it's particularly hard, their pretty common, but when compared to getting parts for a 90 model commodore of falcon it's hard. Overall it's not too bad.
Posts: 19
Joined: Tue Jun 07, 2005 4:09 pm
Location: Brisbane

Post by JC83 »

Well I am now the proud owner of a suzuki sierra. :D Now i just have to find some parts, first things first, a windscreen and clutch. Thanks for the advice
Posts: 137
Joined: Wed Apr 06, 2005 11:46 pm
Location: Maroochydore

Post by suz_rolly »

JC83



Welcome to the party!!!!


:twisted:
suzis rock and f#@k the rest
Posts: 19
Joined: Tue Jun 07, 2005 4:09 pm
Location: Brisbane

Post by JC83 »

suz_rolly wrote:JC83



Welcome to the party!!!!


:twisted:
Thanks, it needs some mods done to it before i can say I am part of the party. Its pretty stock standard :neutral: but hopefully not for long :D
Post Reply

Who is online

Users browsing this forum: No registered users and 71 guests