Outer Limits 4x4 Board

Post by **POIDA** » Mon Jun 13, 2005 6:18 pm

I've searched this site and the net for problems with ACE as I'm about to get a 99 Disco with it. As far as I can tell it is reliable, apart from a recall on it, as posted here last year. What I want to know is has there been any problems with it as far as wear and tear or does it seem to be durable and long lasting. It seems like and expensive system to replace parts on.

Post by **Slunnie** » Mon Jun 13, 2005 8:58 pm

I keep track pretty closely on an Aussie and a global series 2 Disco net, and I've not heard of any ACE systems failing. The only thing that is just showing up is the chassis - swaybar bushes can develop some wear and produce a clunk when changing direction, The bushes cost about $15ea, 4 in total. ACE is definately the go in my opinion though, it has a fair bit more articulation than the non ACE Discos as the swaybars at in low range at low speeds relax and have no effect, and when moving faster corner very flat on the road by hydraulically counter tensioning and removing the body sway.

Post by **POIDA** » Mon Jun 13, 2005 9:42 pm

Yes I was impressed with it's onroad behaviour when I test drove one. And I'm anxious to find out it's offroad advantage. I was concerned about the price of replacing the rams perhaps when they wear out but the disco I'm interested in had 70K klms so it shouldn't be an issue for a while. One thing though is it seems a little noisy, which I guess you'd have to expect for a high presure high speed hydraulic system. The noise seems to be the pump whiring.

Post by **Slunnie** » Mon Jun 13, 2005 10:45 pm

Yeah the ACE is a little noisy. A bit of a hum when cornering.

Post by **sausage** » Tue Jun 14, 2005 6:23 am

Havent seen a ram fail yet. A couple of ACE valve blocks have been replaced (Approx $1900) the only other thing is ACE pipes leaking which the old one piece lines have to be replaced with a 2 piece unit - Approx $400. This is not a common problem that I have seen though. Very good system.
This is kiwi dollars Im talking about too

Post by **POIDA** » Tue Jun 14, 2005 1:00 pm

mmm $1900 for a valve block was what worries me.

Post by **Mick G** » Tue Jun 14, 2005 1:12 pm

I have a '99 S2 with ACE which has 115,000 klms on it and no dramas. I have only had it since 90,000klms mind you but it is a great system and works superbly.
My 10 cents.

Mick

Post by **POIDA** » Tue Jun 14, 2005 1:30 pm

Do you guys find the pump is noisy, like whiring while idling. Particularly under the bonnet with the bonnet up.

Post by **Mick G** » Tue Jun 14, 2005 1:39 pm

POIDA wrote:Do you guys find the pump is noisy, like whiring while idling. Particularly under the bonnet with the bonnet up.

Have never noticed any whiring, but then I am not a mechanic by any stretch of the imagination and therefore would not know that it was the ACE system whiring.

Post by **Slunnie** » Tue Jun 14, 2005 1:58 pm

I only tend to notice the noise when cornering and not on the accelerator.

Post by **Red Disco** » Tue Jun 14, 2005 8:04 pm

It's probably hard to pick over that rattly old diesel

George.

DS2 V8 with ACE

Post by **mickrangie** » Tue Jun 14, 2005 9:53 pm

I'll let u know when I pick my 00 TD5 Disco with ACE up!!

Post by **mickrangie** » Fri Jun 17, 2005 1:22 pm

nope can't hear sh!t over the rattly old diesel

ACE roxors!!!

Post by **POIDA** » Mon Jun 20, 2005 8:38 pm

Picked up the Disco on Friday. ACE is definately awesome. It corners better than a sedan!! Flat as. It's not noisy really. My first diagnosis was right, the idler pully. Also I put the Disco through the mud on the weekend in a little quarry. It went like a dream. With traction control and Hill descent it was really sure footed. I love my D2!!

Post by **Red Disco** » Tue Jun 21, 2005 8:18 pm

Welcome aboard

Post by **POIDA** » Tue Jun 21, 2005 8:39 pm

Thanks, Mine's red too, Goes fast, matches the boat.

ACE

ACE

ACE

Who is online