Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
a:can the front diff be turned over in the housing to make a high pinion(cheap)?
b:has anybody done this?
c:will a later(80'ish series with high pinion)high pinion diff head fit into my 40 series housing with the same axels?
d:cost of a high pinion diff head?
any info appreciated, especially if i can flip my diff,that would be cool
Answers
a: NO the wheels will drive in the opposite direction!
b: Wont work so why bother
c: No 80 series front hipinion wont fit as it is a hilux size diff and they aint to strong. The axle splines are the same thou 30 spline 1 5/16 diametre.
d: Not sure if a hipinion centre is made to bolt straight in, Nissan GQ hipinions can be made to fit (have done a lot times) You you fit a Cruiser rear diff from 1990 on (75 and 80 series) and these have a higher pinion shaft hight than the earlier diffs but is still not a Hipinion.
Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
