Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vit 2.5 V6 is a H25A. It runs the same gearbox as the 2.7 V6 H27A, and they are a LOOOOOONG gearbox. Also has a married transfercase, so you would want to be starting with a LWB zook with plans to stretch it.
Half cut ( if you can get one) would prolly fetch over $3k
Gutless wrote:Vit 2.5 V6 is a H25A. It runs the same gearbox as the 2.7 V6 H27A, and they are a LOOOOOONG gearbox. Also has a married transfercase, so you would want to be starting with a LWB zook with plans to stretch it.
Half cut ( if you can get one) would prolly fetch over $3k
I have fitted a baleno 1600 ( G16B) for under $1500. Thats for 2001 motor with 27000 kms, loom and ecu, all steel etc, and extractors. I already had a fuel pump.
Gutless wrote:I have fitted a baleno 1600 ( G16B) for under $1500. Thats for 2001 motor with 27000 kms, loom and ecu, all steel etc, and extractors. I already had a fuel pump.
Not that dear....
that is a good price, but you know you cant get em for that every time...
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
They are the same output, just have coilpack ignition instead of distributor. Water outlets are in slightly different locations, but I can show you the tricks there if you need me t.
dearest quote I got on a baleno 1600 was $1500 for engine and loom/ecu. Might sound righ but don't forget this motor is 3-5 years old. not 6-8 like most vitara front cuts