Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

knocking noise when turning right

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 23
Joined: Thu Oct 14, 2004 8:30 pm

knocking noise when turning right

Post by RED-GU »

Hey all
l was wondering if anyone had any ideas what could cause a knocking noise in my GU 4.5 parol when turning right? It has a 2 inch suspension kit which are kings springs and Koni's and rolling on Procomp x terrains????
Please help
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

is it only at full lock?
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

check your sway bar link bolts they have a tendancy to come loose on GU's
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 23
Joined: Thu Oct 14, 2004 8:30 pm

Post by RED-GU »

micky its happens when turning corners at a speed of 50kms!!!

Insane l dont have front sway bars on!!!!!! :twisted: :twisted:
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

RED-GU wrote:micky its happens when turning corners at a speed of 50kms!!!

Insane l dont have front sway bars on!!!!!! :twisted: :twisted:
slow down around corners, unless your driving a race car........................ :roll:
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

could it just be coincidence and a spring moving on its seat? what size tyres are you running?

also, radius arms bolts, are they all tight, i know my old mans GU has a click if one of the radius arm bolts come loose
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

Check where the radius arms mount into the chassis. I just popped the ring out of the chassis on the weekend and had a look at the drivers side to find it was cracked as well making a sort of clicking/clunking noise. And before people say it was the 3rd's radius arms it was happening before I put them in. The factory welds on the chassis are crap. I've found bubbling in the welds all over the chassis. Can't believe it would come out of the factory like that. :roll:
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests