Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

We-Rock Rule Tech .

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

We-Rock Rule Tech .

Post by Dozoor »

Question on the Rules , We-Rock Super Modified.
1, Guys the rule's state Dom tube being preferred ,1.5 OD x 0.120
Black steel , If used would be required in what size and wall to please inspection , being the cage .

2, Did'nt notice a mention on nitros did i miss it within the rules ?


3, Manual wheelbase changes allowed , if it was necessary to remove pins manually and use the vehicles foward or rear motion to achieve a change in wheelbase , would this be considered as manually ?
( for instance lock rear brakes remove pins reverse to shorten w/b instal pins ) ?

Larry.
Last edited by Dozoor on Tue Jun 21, 2005 10:44 pm, edited 1 time in total.
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Bump .
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

1. black steel is the same size.

2. closest thing to nitros is

6.12.4: Unleaded, leaded, propane, natural gas, and diesel fuels are approved.

where it doesent say that nitros is approved. Id make a phone call to find out for sure though.

3. I think that would be OK. You are thinking about doing this while on the course?

Sam
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

On Q/3 Probly not on course as this would incur taking reverse penalty .

Thank's Sam .


Larry.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests