Hi
I really want to upgrade my tie rod and drag link as I bend them every other trip in addition I busted the rear tie rod balls twice already...
For the tie rod Should I use the GM balls or stick to LR balls with a stronger tie rod metal and larger diameter that will not bend under abuse....
For the drag link I think I will retain the stock balls as they seem to felx nicely without any issues.
Appreciate your soonest feedback
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GM or LR Tie Rod Joints
Moderator: Micka
GM or LR Tie Rod Joints
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
83 Rangie 2" OME Still Stock
either is ok.
GM one wil require drilling of the mounting hole as the bolt part of the joint is larger than the rover unit.
Michael.
GM one wil require drilling of the mounting hole as the bolt part of the joint is larger than the rover unit.
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Jay,
I just got heims and Chromo rods for my steering...if you want, you can have my GM ones in July (will give you them at 100% cost, R&D, welding, EXTRA welding...etc...)
I just got heims and Chromo rods for my steering...if you want, you can have my GM ones in July (will give you them at 100% cost, R&D, welding, EXTRA welding...etc...)
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
NadimDiscoDino wrote:Jay,
I just got heims and Chromo rods for my steering...if you want, you can have my GM ones in July (will give you them at 100% cost, R&D, welding, EXTRA welding...etc...)
your track rod has a busted weld point that cut you short twice on the trail....plus it is an empty tube
I am looking at a bent tie rod also
Jay
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
83 Rangie 2" OME Still Stock
Who is online
Users browsing this forum: No registered users and 1 guest