Hey,
Installing some A/C into a 1985 patrol ute with the P40 engine in it, can only get an L28 system locally, so I was hoping someone would have a piccy of the engine bay, just so I can see where all the bits went from factory. Hoping moslty the same as an L28, but I think the compressor might be on the other side?
cheers,
jeff.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1985 Patrol Ute, P40 with A/C, any pics?
all your evaporator and condensor etc etc stuff will all fit in the same spots. Even the compressor will be the same.
its just your compressor mounting bracket to the motor and the piping to it that may not fit nicely.... might need to lengthen pipes might need to modify the compressor bracket.......
id take a pic if i had a P40
screwy
its just your compressor mounting bracket to the motor and the piping to it that may not fit nicely.... might need to lengthen pipes might need to modify the compressor bracket.......
id take a pic if i had a P40
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Re: 1985 Patrol Ute, P40 with A/C, any pics?
Hi Jeff,Spanners05 wrote:Hey,
Installing some A/C into a 1985 patrol ute with the P40 engine in it, can only get an L28 system locally, so I was hoping someone would have a piccy of the engine bay, just so I can see where all the bits went from factory. Hoping moslty the same as an L28, but I think the compressor might be on the other side?
cheers,
jeff.
Mine fully kitted up with what you need, tell me exactly what you want in the pics and I'll take them for you probably tomorrow sunday at the very latest, either post here or PM me with what you require.
One problem in fitting the system from a L28 is that everything is on the wrong side, in that all your brackets will be arse about face and they will have different mounting points as the L28 and P40 are not even close to looking the same, but I will help out any way I can.
Cheers.....Steve
Never argue with an idiot, as others listerning may not be able to tell the difference.
Never argue with an idiot, as others listerning may not be able to tell the difference.
Who is online
Users browsing this forum: No registered users and 0 guests