Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

why i keep braking belts

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

why i keep braking belts

Post by bj56 »

i got a 1984 hilux 2 l motor keeps braking the fan belt
has done 3 in 4 weeks
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

are any of the pulleys siezed , is the belt in line with all the pulleys?
does anything smell burnt when driving'
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

they are in line they all spin freely bar the one thats not meant to no sounds no burrning dosent appear to be sliping only 1 off the 2 will brake then i can drive for weeks on the 1 but if i putt 2 new ones back on one will always brake
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

rubber bands

Post by tuf045 »

bj56 wrote:they are in line they all spin freely bar the one thats not meant to no sounds no burrning dosent appear to be sliping only 1 off the 2 will brake then i can drive for weeks on the 1 but if i putt 2 new ones back on one will always brake

stop putting used rubber bans on it that you got off that newspaper that has been lying in the front yard for 3 weeks. :lol:
Reptile fabrication.
www.agroautomotive.net
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

they are repco belts
Top
Posts: 284
Joined: Fri Mar 12, 2004 3:43 pm
Location: Rockhampton

Contact:
Contact skootin

Post by skootin »

Try some genuine ones they are probably not much dearer.
You should allways run matched belts when they are pairs the same size.
I'm not stuck I'm over here!
Watch where you driven!!!
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

yes i got the 2 at the same time
Top
Posts: 1590
Joined: Fri Jun 03, 2005 7:07 pm
Location: Tarneit, Vic

Post by matt.mcinnes »

does it always break the same belt? if so front or back one?
Are they too tight?
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Take your belts off and see if you have a little dent or fine crack in one of the pullys.
Its not cool, unless it's got boost :)
Top
Posts: 172
Joined: Sun Oct 26, 2003 12:46 pm
Location: Kallangur

Contact:
Contact Mechman

belts..

Post by Mechman »

you could just get a decent truck BJ.... thro that ole thing away.
ohhhhh shite... it really didnt look that deep!
Top
Posts: 964
Joined: Mon Jun 02, 2003 6:58 pm
Location: brisbane

Post by bj56 »

brakes both the f and back no cracks or dents u can talk mech man who towed whos rig out with broken springs last trip :lol: :lol:
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

If none of the pulleys have burs on them I would look if there is anything loose that can hit the belts, is the battery dripping acid on them when 4wding. And did you buy all the same brand of belt from the same supplier, could be a faulty batch of belts.
Have you found a broken belt, is it frayed or a clean break?

This is all assuming that you have made sure that all the pulleys are all in alignment.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

how tight at you tensioning them, have you uses a striaghtedge and string line to make sure pulleys are perfectly in line,
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest