Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

suspention again

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 23
Joined: Tue Jun 15, 2004 3:55 pm
Location: brisbane

suspention again

Post by jeaneil »

well no one was able to give much advice on parabolics so here is another one,can any one say what would be good for a hilux ute tray back rear set that does'nt carry much weight (exept when we go camping) without mods it has parabolic on front any thoughts would be very much apprecated as we r getting axle wrap at the moment and have bent rear springs are getting a torque rod made up to stop axle wrap just need to get good springs and good wheel travel (do a lot of rock work)
if it's not dirty your not playing hard enough
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

go the IFS rear springs with a trac bar, ive just done it to mine recently and it works very well.

all the info on it is here...

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=43248
Yurich Design Services
www.yds.net.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests