Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux gear box ????
Moderators: toaddog, Elmo, DUDELUX
hilux gear box ????
is it possible to bolt a hilux gear box up to a 2f motor
team scrotum we,ve got balls
33s on 15*8s ,f+r lockas, 2in spoa lift, rears up front
33s on 15*8s ,f+r lockas, 2in spoa lift, rears up front
it's a no for lots of reasons. To start with if it's a G52 gearbox, it's just not strong enough for a big 6 cylinder motor. the rear output on the hilux transfer is centrered; the rear diff on a 40 is offset and the rear tailshaft is quite short; the uni joint angles would be horrendous. the input shaft spline, length and spigot diameter are all wrong. also not likely to be a bellhousing to mate them up, and a 2F bellhousing won't even go close to bolting to the front of a g52. It's about as close to impossible as you can get really...hypo lux wrote:putting the box in a 40
a H55F with transfer can be picked up for under $400, or a 4 speed with transfer often sells for under $200, so shop around, you can get a good gearbox for a good price.
hope that helps!
cheers
Brian
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 3 guests