how to keep rears up front legal

[batcho101]

hey guys jsut tryign to work out a way that i can keep a rear spring up fron conversion legal.
i am thinking of using superior engineering mounts so that i can use my standard rear shackles up front but have them mounted under the chassis? are shock hoops legal? i am hoping that once doen the only part that will be illegal is the sguare front driveshaft..

so far the list is
Rear springs-all ready in shed.
dropped shackle mounts-$90 pair.
Shock hoops- $170.
Shocks-$240.
and square front driveshaft-free(booty fab).
if anyoen knwos sumthign i ahve forgotten or whether this way woudl be legal or not it would be appreciated
regards michael
http://www.superiorengineering.com.au/p ... category=3

[ausyota]

You are probably going to need crossover steer.
If it flexs good you will probably break your J arm.

Also every rig I have seen with the shackles under the chasi has been way too tall.

Paul.

[batcho101]

ausyota why would it make it to tall if i am using standard laength shackles wit ha 2 inch lower mount isnt that exactly the same as 2 inch shackles?
and yeh crosover is on the cards just gotta find the stuff on the cheap

[Aza]

y not have stock hangers and longer shackles (no dropped hangers u will defantly need longer shackles), also ausyota 83lux has longer shackls and dropped hangers with rears up front and his is only 2" higher than stock. to do this u just get the spring reset flat