I'm doing an extra cab conversion to my 89 GXL wagon.
Need a few things like;
A) A steel dropside trayback either off a 'cruiser or patrol.
B) Side opening type windows out of a hilux including the sections of body panel around the windows so I can stitch them in. Not sure what the model hilux these come out of so I could check the wreckers out.
I've attached what the beast will look like when done.
Anyone can help me out in sourcing these bits I'd appreciate it.
Ta.
Mike
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Landcruiser extracab conversion
Moderators: toaddog, Elmo, DUDELUX
Landcruiser extracab conversion
You do not have the required permissions to view the files attached to this post.
Mike,
1) the ute in the picture looks like it has had the chassis extended by around 900mm, judging by the lack of rear overhang it has. If you try to put a full size tray on a standard length chassis you overhang will be huge.
If you want a full length tray, then it could get expensive cause you will have to lengthen the chassis.
OR you could fit a tray of a dual cab hilux/courier etc and keep the standard wheelbase.
2) As for the windows, I would have thought you would do a cut & shut on the rear window frames already in the rear of the wagon. Then cut down the fixed glass to suit your new frame that you have booty fabbed up.
Rear opening windows in an extra cab always leak & are a PITA to open/close. Solids are much better.
Lets us know how it goes,
Randal.
1) the ute in the picture looks like it has had the chassis extended by around 900mm, judging by the lack of rear overhang it has. If you try to put a full size tray on a standard length chassis you overhang will be huge.
If you want a full length tray, then it could get expensive cause you will have to lengthen the chassis.
OR you could fit a tray of a dual cab hilux/courier etc and keep the standard wheelbase.
2) As for the windows, I would have thought you would do a cut & shut on the rear window frames already in the rear of the wagon. Then cut down the fixed glass to suit your new frame that you have booty fabbed up.
Rear opening windows in an extra cab always leak & are a PITA to open/close. Solids are much better.
Lets us know how it goes,
Randal.
2005 GU3 Patrol ST Ute
Chassis measurements for the 60 series
I spotted the hilux chassis measurement thread and wonder if there's one about for the 60 series. That'd help plan this project.
Ta guys!
Ta guys!
This is the exact idea I had to do to my shell I´ve had sitting in the garage for the last 10mths. I reckon it´ll turn out pretty sweet..... when I get the time & $$$ to play with it...Sixty wrote:Unless you need the window to open, use the standard quarter windows in the rear doors. Just swap them to the other side so they'll line up!
When in doubt..... UTE-ERIZE it!!!
i know this is totally different but wen we did ours we just bought a old tray from wreckers(we think it was of a 75)and got the oxy out and cut it up then joined it 2gether than got it galvanised.
You do not have the required permissions to view the files attached to this post.
NECKUPYAPARROT4x4
Tosa_03
Proudly sponsored by and part of:-
Tosa Racing Co.
Tosa_03
Proudly sponsored by and part of:-
Tosa Racing Co.
Who is online
Users browsing this forum: No registered users and 1 guest