Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
i fitted my new long range tank today, but the hose they gave me for the main filler tee, is a reinforced thing that won't crush down when you put a hose clamp on it. as a result it leaks. even better, it leaks all over my exhaust.
insert running away as fast as i can owner here
anyway. can anyone tell me where i can get a hold of fuel grade rubber or otherwise flexible pipe around inch and a half ID, about a metre and a bit long
in the meantime i need to figure out where i will put 150odd litres of diesel so i can work on the tank
look up industrial hoses in the yellow pages, every city will have places which sell that sort of hose. ( and i dont mean Repco). Here in Adelaide it is called Adelaide Belt and Hose.
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
i fitted my new long range tank today, but the hose they gave me for the main filler tee, is a reinforced thing that won't crush down when you put a hose clamp on it. as a result it leaks. even better, it leaks all over my exhaust.
insert running away as fast as i can owner here
anyway. can anyone tell me where i can get a hold of fuel grade rubber or otherwise flexible pipe around inch and a half ID, about a metre and a bit long
in the meantime i need to figure out where i will put 150odd litres of diesel so i can work on the tank
try a proper cam type clamp, the fuel resistant viton or similar elastomer hoses are hard to find in a soft type hose, and even then are VERY expensive. a decent cam type clamp will set you back $10 - $15 depending where you get it, but pirtek, hydralink etc will have them
If the above post did not offend you in any way please PM me so I can try harder!!
