Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
F6a 660 turbo
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
What's the smallest boost gauge you can get?
You could do what i said in the top left for the engine warning light.
Put the turbo light in the right hand and bling! in the top middle a boost gauge
Alternatively you could graft the top dash of a NT and put the factory gauges in. The speedometer can be 'adjusted' to match the one your taken off with a drill and toothpick. Say 'yes officer she was the 1l model but i upgrade her to stronger australian turbo model )
it would be good if someone could send me some close up shot so i can see what i'm worjing with
You could do what i said in the top left for the engine warning light.
Put the turbo light in the right hand and bling! in the top middle a boost gauge
Alternatively you could graft the top dash of a NT and put the factory gauges in. The speedometer can be 'adjusted' to match the one your taken off with a drill and toothpick. Say 'yes officer she was the 1l model but i upgrade her to stronger australian turbo model )
it would be good if someone could send me some close up shot so i can see what i'm worjing with
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
sorry about how long it took to get the picsgreg wrote:have you got any shots of the gearbox fellas?
i'd like to see what the back half of it looks like - i.e. the gearbox mounts, gearstick and tail housing.
thanks,
Greg
we used the standard jack shaft no need to modifi it
You do not have the required permissions to view the files attached to this post.
suzis rock and f#@k the rest
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Wait.. was the dash Bolt in!?
Great photos, should write up a basic tutorial and add it to the Bibble
Great photos, should write up a basic tutorial and add it to the Bibble
Last edited by Santos on Sun Aug 21, 2005 11:10 pm, edited 1 time in total.
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Santos wrote:Wait.. was the dash Bolt in!?
Great photos, should write up a basic tutorial and add it to the Bibble
yes the dash is a strait bolt in...once you cut the old dash out.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
cut 4B wrote:well it took a bit longer than i thought but the 660 is in and its great drove it home today good power for a little motor fun to drive ill post some pics
it did only take 2 days dude....
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Who is online
Users browsing this forum: No registered users and 1 guest