Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How to trace a loose connection?

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 227
Joined: Mon Sep 20, 2004 8:05 pm
Location: the vegas

How to trace a loose connection?

Post by benno_from_brizvegas »

Hi guys,
I think my lux has a loose connection somewhere:

On some bumps, all the lights flicker, and the stereo turns off (and then turns itself back on again)

I haven't blown a fuse ever, so that would seem to rule out a short.

Any ideas on where to start?

I've had a quick look around and it's nothing obvious. The earth lead is new.

The battery seems to be a little weak also, could this fault be internal to the battery in any way?

Thanks for your help guys,
Ben
Posts: 35
Joined: Sat Nov 29, 2003 9:06 pm

Post by brad84hilux »

This is unliley but worth mentioning - check the battery terminals are nice and tight. Exactly what you've described has happened to me before (accessories dying when hitting a bump), and I just needed to tighen my terminals.
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

Try moving all the wiring looms in the engine bay around while it's running and see if you can get it to fail. Try the same under your dash.

PS: keep clear of the coil and ignition leads if it's a petrol engine!! ;)
David
Posts: 1170
Joined: Tue Jun 01, 2004 4:27 pm
Location: Goodna, Queensland

Post by Bartso »

i would bat terminals loose if not check your earth again if it is new it might not be connecting good enough ;)
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
Posts: 227
Joined: Mon Sep 20, 2004 8:05 pm
Location: the vegas

Post by benno_from_brizvegas »

Sweet, thanks guys.

It's not the battery terminals, I'm not lucky enough to have a problem that is so easy to fix :twisted:

I'll try moving random wires around in the engine bay to see if I can find it.

Cheers,
Benno
Posts: 25
Joined: Sat Apr 23, 2005 10:39 am

Post by WIDE BOY »

if you can get a small am radio and tune it in to a where there is no station , hold it near the wiring loom as you wriggle the cable any poor conection will produce a loud crackling. that may get you close to the source of the problem.
regards wide boy
Posts: 25
Joined: Tue Feb 01, 2005 1:48 pm

Post by wayne74 »

id be checking ya fusible links usally they should be on ya positive batt terminal if they heat up they can break and could be the cause
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests