Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

jump starting 24v?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 164
Joined: Fri Jan 02, 2004 12:19 pm

jump starting 24v?

Post by gurumon »

im really loving this 24 thing.... :?

so one of the mq's has flat batteries again - im too lazy to pull the batteries and recharge them.

i have another (working) 24v mq....

can i run 2 sets of jumper leads? how do i connect them?
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Post by "CANADA" »

from one batt' only
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 2678
Joined: Fri Feb 27, 2004 2:35 pm
Location: Crestmead

Post by Doggy »

I've found its easier to clutch start my swb safari, just drag it along then clutch it, easy as
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

If you have another 24v vehicle, just hook the jump leads from the +ve on one battery and the -ve on the other to the same on the disabled car. (obviously dont connect to the two terminals that are connecting the 2 batteries)

If you have a 12v vehicle to jump it off, measure the voltage of both batts on the disabled vehicle and hook the jump leads from that battery to the one on the running car.

does that make sense?
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

This might help (or it might not, lol)

you only need 2 jump leads (red and black in the pic)
You do not have the required permissions to view the files attached to this post.
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

and if you need to jump it off a 12v vehicle (it can be done but is easier if one battery still has a bit of life in it or if they are both only slightly low)
You do not have the required permissions to view the files attached to this post.
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

I cant see a problem useing the other 24 volt to jump start . As long as you put 24 volts to the output lead ( starter motor) it should work no dramas.

Cheers
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

24v

Post by DR Frankenstine »

When I had a 24v system in my old nissan I found I could jump off a 12v battery only hooking up to one of the two in my car. If it doesn't work on one hook up to the other instead.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests