Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What is the strongest rear diff????

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 18
Joined: Sun May 29, 2005 5:09 pm
Location: Right here

What is the strongest rear diff????

Post by Tube Works »

Without being silly, what is the strongest everyday 4x4 rear diff. :?:
Rego SUCKS bring on the buggies.
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

H260 Nissan?

Dana 60's out of the old G60 Patrol? (good luck finding a locker)

Unimog isn't quite an everyday diff but Im sure there's some 4x4 tiptrucks from Diahatsu or someone that are relatively common
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Post by "CANADA" »

ford 9'



or a 12 bolt gm....good luck finding on in oz tho
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

Beastmavster wrote:H260 Nissan?

Dana 60's out of the old G60 Patrol? (good luck finding a locker)
i dont think g60 patrols came with dana 60's
www.overkill4x4.com
ph 94766137
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

full floater rear diff...

yota 60 series??

dana 60's

ford 9 inch

GM 12 bolts

oh and moved to general tech as its a 4x4 discussion related topic
Top
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

GU TD42T leaf sprung rear diff with the full floating hubs, there F***ing huge !!

or Dana 60
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Post by Micka »

A salisbury diff that came out in rovers would be up there.

But the ones already mentioned are tuff as nails


Micka
Top
Posts: 1813
Joined: Sun Oct 20, 2002 3:31 pm

Post by Strange Rover »

Lots of misinformation here.......

In terms of "everyday" diffs then

Salisbury is weak - only got little 24 spline axles - can be ungraded to 35
9in is weak only got little 28 (car) or 31 (F100)spline axles - can be upgraded to 40
Dana60 is weak - only got little 30 (f250) spline axles - can be upgraded to 35 spline
12 bolt is fawkin weak no matter how you upgrade it.


So the strong everyday diffs are IMO-
Nissan H260 - about a 10.25in crownwheel and approx 1.6in 37 spline axles
D70 - about a 10.5in crownwheel (I think) and 1.5in 35 spline axles
14 bolt - about 10.5in crownhweel and 1.5in 30 spline axles

Sam
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

Strange Rover wrote:Lots of misinformation here.......

In terms of "everyday" diffs then

Salisbury is weak - only got little 24 spline axles - can be ungraded to 35
9in is weak only got little 28 (car) or 31 (F100)spline axles - can be upgraded to 40
Dana60 is weak - only got little 30 (f250) spline axles - can be upgraded to 35 spline
12 bolt is fawkin weak no matter how you upgrade it.


So the strong everyday diffs are IMO-
Nissan H260 - about a 10.25in crownwheel and approx 1.6in 37 spline axles
D70 - about a 10.5in crownwheel (I think) and 1.5in 35 spline axles
14 bolt - about 10.5in crownhweel and 1.5in 30 spline axles

Sam
I agree, and in one of the later 4 wheel mags from the states, the 14b chev with the 10.5" ring gear is very strong, also the newer 14 bb with the 11.5 gears are stronger. Strangly they rate the 10.25 and 10.5 Sterling diffs (out of late '80's onward f trucks) even stronger.

Dana 60's are not very strong, except in a front application. they are the strongest around, but usually need upgrading.
Dana 70's are stronger fronts, and strong rears, although only found in late OKA's in the front.

Rear diffs need to be a Full Floater for strength, with large tyres.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests