When I was in the US not long ago, I was lucky enough to get to tag along on a short wheeling trip in a place called Carnage Canyon, which is halfway between Longmont and Boulder in Colorado. I was a passenger in the yellow 90, which was stock apart from 33's and some protective gear (no lockers). The red 90 is very heavily modified.
Thanks to Yousef and everyone else for letting me tag along, and thanks to Keith Kreuzer from Rovertracks for setting it up and for selling me the parts I wanted for a VERY good price.
Carnage Canyon is on the US equivalent of State Forest land. Pity we don't have tracks that good in OZ SF's.
I found out that siped 37" MTR's do really well on rock. Oh, and I also found out that rover V8's idle terribly at over 1600m altitude.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Colorado D90 "Wheeling"
Moderator: Micka
Colorado D90 "Wheeling"
You do not have the required permissions to view the files attached to this post.
Last edited by ISUZUROVER on Mon Jul 18, 2005 11:04 pm, edited 1 time in total.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
If anyone is interested, the specs on the red 90 are:
Front and rear ARB lockers and lower ratio ring and pinions (4.1 or 4.75?).
35 spline Salisbury rear
Heim jointed super long, super beefy trailing arms
Rear coilovers
Custom roll cage
37" MTR's with added siping
Front and rear ARB lockers and lower ratio ring and pinions (4.1 or 4.75?).
35 spline Salisbury rear
Heim jointed super long, super beefy trailing arms
Rear coilovers
Custom roll cage
37" MTR's with added siping
Last edited by ISUZUROVER on Tue Jul 19, 2005 10:34 pm, edited 1 time in total.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Whats the deal with his front shock setup?? Why's he (or she) running them outside of the spring. I assume they would be doing it for more travel? similar to running extended shock towers?ISUZUROVER wrote:If anyone is interested, the specs on the red 90 are:
Front and rear ARB lockers and lower ratio ring and pinions (4.1?).
35 spline Salisbury rear
Heim jointed super long, super beefy trailing arms
Rear coilovers
Custom roll cage
37" MTR's
No idea. AFAIK most of the suspension/axle mods on his (Yousef's) truck were done by Keith from Rovertracks (Revor on pirate). I'm sure he would be happy to answer the question if you PM him.stuee wrote:
Whats the deal with his front shock setup?? Why's he (or she) running them outside of the spring. I assume they would be doing it for more travel? similar to running extended shock towers?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
If you have lots of travel on the front the shock binds in the spring seat as you can't get a straight line from top to bottom mount through the spring seat. You get a bending force on the shock.
I had to move my shock to this position.
It also makes changing springs and shocks a lot lot easier.
Tim
I had to move my shock to this position.
It also makes changing springs and shocks a lot lot easier.
Tim
Life's too short for a full time job
Who is online
Users browsing this forum: No registered users and 32 guests