Hey there i am quering for a mate but he wants to know what is the easiest and cheapest way to lift a 75 lancruiser ute?? Can you just buy extended shackles to get her up and maybe a body lift?? Any suggestions would be great, he is just looking for some more clearance for the 35's even though they fit staight on.
Cheers,
TinyGQ
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cheap lift for 75?
Moderators: toaddog, Elmo, DUDELUX
Cheap lift for 75?
2008 Ford Ranger Supercap XLT
Road Ranger
yeah, don't go much taller than about 30mm longer shackles in the front axle, can make for some interesting handling
too long a shackle in the rear can stuff up your pinion angle too.
bodylift is simple.
also 2 inch spring lift or (flame suit on) a GOOD spring reset
mate of mine with a 75 runs 35's and only has a slight body lift (inch or somethings) and reset springs, and slightly longer shackles to suit, it hasn't sagged in 2 years and flexes like it's on coils
too long a shackle in the rear can stuff up your pinion angle too.
bodylift is simple.
also 2 inch spring lift or (flame suit on) a GOOD spring reset
mate of mine with a 75 runs 35's and only has a slight body lift (inch or somethings) and reset springs, and slightly longer shackles to suit, it hasn't sagged in 2 years and flexes like it's on coils
Spit my last breath
BodyLift on 75
i am keen on throwing a 2 inch lift in my hj75 ute, anyone know who i can get a good deal from i need the blocks,bolts,nuts,and washers i was thinking of giving sam a ring from overkill, also i need to know can i put that size lift in without lengthening components or not.
Who is online
Users browsing this forum: No registered users and 1 guest