Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine mounts

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Engine mounts

Post by STIKA »

has anyone had problems with breaking RR engine mounts

is there anything you can do to to lenghten the life of the standard RR mounts :?:
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

i think your cure is to use jag v12 engine mounts. from what I understand they just bolt straight on although I have not had the problem personally.
Warn - Dont leave home without it
Top
Posts: 683
Joined: Thu Mar 06, 2003 3:42 am
Location: Sydney

Contact:
Contact GURU

Post by GURU »

yeah they do. ring greame cooper he sells them.
Jag ones are 4" diamtre compared to rover 3"

They won't fit the gearbox mounts though (not enough room)
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Top
Posts: 268
Joined: Tue Apr 19, 2005 7:00 pm
Location: Brisbane

Post by Rangie ute on 38'' »

do you have extractors, cause when i fitted mine they come orfully close to the rubber mounts which deteriated very quickly and the heat made them very brittle and would give the flex or bit of give
Top
Posts: 141
Joined: Sun Jan 16, 2005 7:22 pm
Location: Gold Coast,Tweed

mounts

Post by THE 109 »

i've welded chain links to my chassis and mounts and used chain and shackles to stop excess flex as the motor tries to twist in the chassis,and from hitting big bumps to stop engine from lifting too far.that way if your mounts are shot the engine won't move.prolongs their life if heat and oil aren't a problem.
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

I have no oil or heat problems the mount lasted about 6-8 weeks

The chain sounds like a good option


Thanks
Top
Posts: 3
Joined: Fri May 21, 2004 2:06 pm
Location: Whippany, Nj USA

Post by AdrianS »

QT has these and the bushings can be replaced.
You do not have the required permissions to view the files attached to this post.
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

excuse my ignorance but who or what is QT

and how much are they :?:
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

Don't replace it with the Repco poly urethane ones. Didn't last long at all.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 5
Joined: Sat Jul 03, 2004 6:48 am
Location: newark, nottinghamshire, england

Post by ratman »

Q. T. service are a UK based company link below:


http://www.qtservices.co.uk/
Top
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm
Contact:
Contact STIKA

Post by STIKA »

thanks ratman
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 3 guests