What is the colour of Std Rear coils on a 110 and 130??
My 110 has red/green in the rear 8 turns non progressive
But i have a set of 130 brown/purple rear coils progressive 9 turns.
Are these STD or have i got something different.
Aim is to have it raised to 2" more to get 34's to fit.
Steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
front spring rate
Moderator: Micka
Steve, red/green are what are in my 130, and appear to be the stock Oz 110/130 (non ride leveler) pre '00 rears, at least all the ones I've looked under.
One of the best lists of spring info is here, although I cant see that particular colour combination.
What are the dimensions of the brown/purple ones ?
One of the best lists of spring info is here, although I cant see that particular colour combination.
What are the dimensions of the brown/purple ones ?
300Tdi Defender 130 CC
The Purple / brown are 19mm Coils or there abouts.
9 turns or 10 depending on how you read it.
Progressive and 16.5" Free Length.
Inner ones to match were green
These came out of a 2002 model 130
Are all 130 custom made?? This one is a UK built wear some were South African. the Fire guys in our area have SA built ones and are not happy.
This 130 was a 110 with the chassis cut and lenghened to 130. i thought the 130 was a off the shelf??
It was built as a 130 in the UK and shipped as a Cab chassis.
The fella told me all about it.
So there is a new one to add to the list.
So it being 1" taller could mean i might get that 2" lift i want?
What is the ratio of coil hight to car height?
Years ago i had a volvo 240 and if you cut 1/8" of the coil it lowered it 1". i think......
I cant change them over to test it yet but i'm getting some coils for it that will raise it 70mm over STD. i hope so...
9 turns or 10 depending on how you read it.
Progressive and 16.5" Free Length.
Inner ones to match were green
These came out of a 2002 model 130
Are all 130 custom made?? This one is a UK built wear some were South African. the Fire guys in our area have SA built ones and are not happy.
This 130 was a 110 with the chassis cut and lenghened to 130. i thought the 130 was a off the shelf??
It was built as a 130 in the UK and shipped as a Cab chassis.
The fella told me all about it.
So there is a new one to add to the list.
So it being 1" taller could mean i might get that 2" lift i want?
What is the ratio of coil hight to car height?
Years ago i had a volvo 240 and if you cut 1/8" of the coil it lowered it 1". i think......
I cant change them over to test it yet but i'm getting some coils for it that will raise it 70mm over STD. i hope so...
1986 County, Auto, Locker, Maxi Crawler gears.
1987 RRC, Auto, Lockers, Himount. POS
1987 RRC, Auto, Lockers, Himount. POS
AFAIA, all 130's are cut and lengthened 110 chassis, and the UK built ones are made by Land Rover Special Vehicles. I've heard the same complaints about SA built vehicles as well.
You could try those 130 springs, but I'd be betting ride height it will be the same height, or maybe a touch less than the red/greens.
Can you get a vernier on the wire, and an accurate number of total turns, including the closed and ground ends, and the number of turns to the transition where they are close together, please ?
Email it to John at the page I linked to above, and post it back here as well. We'll see if we can work out the rate.
You could try those 130 springs, but I'd be betting ride height it will be the same height, or maybe a touch less than the red/greens.
Can you get a vernier on the wire, and an accurate number of total turns, including the closed and ground ends, and the number of turns to the transition where they are close together, please ?
Email it to John at the page I linked to above, and post it back here as well. We'll see if we can work out the rate.
300Tdi Defender 130 CC
Who is online
Users browsing this forum: No registered users and 0 guests