Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

vibrating......Mavrick

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 74
Joined: Mon May 17, 2004 10:30 pm
Location: sunshine coast, QLD

vibrating......Mavrick

Post by Terry_Toyota »

Hey guys and gals,

just wondering why i'm geting vibration at the steering wheel at about 80k/h - 90k/h? i have 2' lift but i have all ways had that lift and its only just happend, could this mean that i just need a wheel allinement or new bushers???
any help would be grate...

Cheers Nick :D
Live it, Love it, Don't waste it ;)
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Re: vibrating......Mavrick

Post by Cossie »

Terry_Toyota wrote:Hey guys and gals,

just wondering why i'm geting vibration at the steering wheel at about 80k/h - 90k/h? i have 2' lift but i have all ways had that lift and its only just happend, could this mean that i just need a wheel allinement or new bushers???
any help would be grate...

Cheers Nick :D


the 2 foot lift is almost certainly your problem!!!! :P

look in the bible or search - its been covered about 3 million times.
It could be any of the bushes, incorrect castor angle or wheel balance (they seem to be very sensitive to this once lifted)
The hardest thing about owning a jeep is telling your parents you're g a y!!
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

i think that came standard on the GQ............. :roll:

i dont think there is a quik fix for it other than removing the lift from what ive heard, otherwise upgrade to a GU :armsup:
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

seems to be standard
mine had it when i removed my old front bar and winch i got new bushes wheel alignment balance and such helped but was still there after a few months of driving ( weekends mainly ) it had droped to very intermitent and infrequent.

on the weekend put a winch back on and the wobble is back but only when cold once driving for 10-15 all is good



so all in all i have learnt to live with it.
www.mudrhino.com.au
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

...

Post by JemmyBubbles »

I find if I put my right foot in the car first and stare directly at the sun It doesn't vibrate.. But if I get in Left hand side first it does... ???

No honestly I don't have a shimmy. 4" coils + 5.5 degree castor plates. Brand New Genuine Bushes in my adjustable Panhard and Radius Arms. Snake Racing Drag Link. My front end is held together well.

Just a bit of bumpsteer. Nothing some highsteer wont fix. My theory is this and gurus may think I am an idiot. But the bumpsteer that these vehicles naturally exhibit I think leads to causing this shimmy. Gradually Wears out bushes/swivel hub seals + Other Miscellaneos Front end Crap Crap. If the shimmy gets bad enough you will Shag your power steering box.

I did. When one of my previous urethane panhard bushes chewed out and the car got the death wobbles really really bad. The day after the box had dropped all its fluid...

Moral is Shimmy = Bad
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Posts: 9
Joined: Tue Apr 19, 2005 5:56 pm
Location: sydney

Bad Vibes

Post by tjgood »

My patrol had this problem when I was running Khumo tyres. It worked out to be, after many dollars & heart ache that the plyes were separating on the tyres. They balanced fine but as the wheel rotated slow on the balance machine you could see the run out.
trev
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

get your tyresballanced ON THE CAR at a truck tyre place, GQs and to some extent GUs are very prone to shakes especially when you lift them, check the bushes and always replace with genuine as they are softer and allow flex and movment more readily and dont flog out near as quick, when you are getting the ballance done also do a wheel alignment and you should find the shakes go away, also check the steering dampner, castor should be fine, but I have heard fo people putting castor bushes in and fixing the prob although I tend to think this is more due to the old byshes being stuffed rather than the castor being incorrect as 2" should not require any castor correction, and with 33s (if you have them) should mean the castor is well within the exceptable range, feel free to PM me any Qs if you dont understand my ramblings :D
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Re: Bad Vibes

Post by dwaynes »

tjgood wrote:My patrol had this problem when I was running Khumo tyres. It worked out to be, after many dollars & heart ache that the plyes were separating on the tyres. They balanced fine but as the wheel rotated slow on the balance machine you could see the run out.




Interesting someone not long ago mentioned that BFG had a similar problem at one stage
www.mudrhino.com.au
Posts: 74
Joined: Mon May 17, 2004 10:30 pm
Location: sunshine coast, QLD

Post by Terry_Toyota »

[/quote]the 2 foot lift is almost certainly your problem!!!! Razz

look in the bible or search - its been covered about 3 million times.
It could be any of the bushes, incorrect castor angle or wheel balance (they seem to be very sensitive to this once lifted)[quote]

ah mate its 2 inchs NOT 2 foot, the castor angles are pretty much standed...

but any way i guess i mite just have to live with it thanks guys

Cheers Nick
Live it, Love it, Don't waste it ;)
Posts: 74
Joined: Mon May 17, 2004 10:30 pm
Location: sunshine coast, QLD

Post by Terry_Toyota »

or i mite try that truck place...mmm
Live it, Love it, Don't waste it ;)
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

mine had a pretty horrible wobble at 90 - 100 k's when it was totally stock.

I found that the radius arm bushes were totally flogged out so I threw a 4" lift and set of OME castor bushes in and it reduced the wobble drastically. I recently replaced the 31's with a set of 2nd hand 33" MT/R's (fitted and balanced on my rims) and the wobble has disappeared completely - it almost drives like new!!

so it seems to be an accumulation of things, check/replace bushes and get the tyres properly balanced (shouldnt need to have it done on the car though), maybe even try someone elses wheels or swap front to back and see if it helps?
The hardest thing about owning a jeep is telling your parents you're g a y!!
Posts: 716
Joined: Tue Jan 13, 2004 7:24 pm
Location: Melbourne

Post by TUFFRANGIE »

my gq shorty on 33x12.5bfg muddies wobbled

now have 33 in claws, drives like new again. I would put my money on a tyre issue mate
Posts: 74
Joined: Mon May 17, 2004 10:30 pm
Location: sunshine coast, QLD

Post by Terry_Toyota »

yeah it was a tyre problem i tock it to the tyre place to get him to change the front to the back and he spoted it right away i had like 5cm or 8cm of mud caked on to the inner side of the left hand fron wheel witch had through the whole lot out of place...any way that what he said theres still a slite problem,
but i can live with it

cheers Nick
Live it, Love it, Don't waste it ;)
Posts: 275
Joined: Sun Oct 05, 2003 10:32 pm
Location: Sunniecoast

Post by scorched »

:idea: good thinking :idea:
Gq patrol
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest