Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
all zuk's like to rev... not sure about 4k though?
mine sits on about 3400rpm in 5th doing 100. however i am running larger tyres and no gearing to compensate - so id expect it should be about 3700 on stock tyres.
yep thats what a jimny is like ,i have 2001 model a m13a engine which is the dohc motor and its a manual ,so has the 3.909 diff ratio and mine does about 4300 rpm at 110kph.
salli wrote:yep thats what a jimny is like ,i have 2001 model a m13a engine which is the dohc motor and its a manual ,so has the 3.909 diff ratio and mine does about 4300 rpm at 110kph.
youll prolly find you have a 4.09 diff ratio (45 teeth on crown wheel n 11 on the pinion) my 04 model does when the documentation said 3.909
that rev range sounds about right.
they make peak torque (110nm) at 4500rpm i think
and peak power (60kw) at 5500 rpm
i would take mine 4 a run but the gearing is out so 100 on the speedo is like 125 kph
The engine sounds loud when going 100km/hr - just the sound of the engine reving - it's not too loud - but loud enough to be annoying! Should I ask the dealership about it, or wait for a service - I have had the first 1000 km service - the next ones not due until 15000km (I have had it 6 moths and have done just over 9000km)