Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cooling system bleed?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 42
Joined: Thu Oct 07, 2004 4:32 pm
Location: Mitcham

Cooling system bleed?

Post by busman »

My GQ td42 blew a water hose to the turbo today(didn't get past 3/4 on gauge and travelled approx.2kms to shop) had it replaced,on the drive home was running up to 3/4 on gauge previously never past 1/3. Is there a bleed screw in the system?
Posts: 42
Joined: Thu Oct 07, 2004 4:32 pm
Location: Mitcham

cooling system bleed?

Post by busman »

Stop panicking just found it in search engine. At rear of block on exhaust side.
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

that is actually a drain plug, i believe,
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Bleeder hose runs from Thermostat housing outlet to radiator filler neck. Filling system slowly allows air bubbles to bleed off here.

Nick
Posts: 42
Joined: Thu Oct 07, 2004 4:32 pm
Location: Mitcham

cooling system bleed?

Post by busman »

Thanks for that guys, i'm going out to have a look now fingers crossed i haven't blown a headgasket.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest