Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2" lift '03 Disco

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

2" lift '03 Disco

Post by brooksy »

Just wanted to know what everyone recommends, best performing shocks & springs combination that achieves a 2" lift (genuine)
I have airbag rear but have already purchaced 4x4 des. & eng. 50mm block lift kit.
I am in Brisbane, OL told me tough dogs only come in 35mm lift for Disco S2, is this correct? I can get old man emu in 50mm but have heard stories of sag after 6-12 months. I am interested to know the opinion of bilstein shocks & king springs.
If it isn't too much can you give me the part no's of your recommended set-up would be greatly appreciated.

P.S. I want to fit 33" simex ET's on 2nd set of rims.

cheers

brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Posts: 172
Joined: Thu Nov 25, 2004 11:21 am
Location: Gold Coast

Suspension

Post by Mick G »

Hi Brooksy

I have the OME shocks and springs all round which gives me a 2" lift. Don't have part numbers to hand but they are the hardest springs OME do for the disco as I have set it up for touring and camping etc. When loaded up, I am very happy with the ride height as there is minimal sag and the handling on and off road is great too. They do a fantstic job when tackling some hard rutted stuff too. I have had them on nearly 12 months now and they are still performing as they did when I first got them. Only thing I don't like is the round town stiffness when the car is empty, but then everything is a compromise and you should be okay with your rear bags. The harshness has been made slightly better by fitting 265/75r16 BFG muds over the factory issue 255/65 - not sure if you would fit 33" without cutting gaurds etc, but do a search as this has been discussed previously. The muds I have come it at just under 32" (31.7" to be exact on one scale I read) and there is zero rubbing either at full lock or full articulation, but it is very close - I had to grind off the end of a bolt in the rear wheel arch.

I'll e-mail you some pics of my car wihout the mud tyres which will give you an idea of ride height, but look at my Avatar also which shows my rear wheel arch with the muds fitted. I have heard good things about the Bilstein's also but also that they are expensive.

Hope this helps and see you on the tracks sometime.

Aye, Mick[/img]
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

King springs gave me in a TD5 Auto 40mm front and 31mm rear, to which I added a 20mm spacer.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 151
Joined: Mon Mar 01, 2004 7:00 am
Location: Melbourne

Post by OnPatrol »

My Disco 2 also has airbag rear SLS, fitted with 4x4 Design & Eng kit, OME shocks all around and Dobinson springs for the front. This gives 50mm of lift. With 265/75/16 Cooper STTs there is slight rubbing on the front left. I also have a set of 265/75/16 BFG ATs and they rub on the front left as well. As you can see from the photo there isn't much room under the guards.

With SLS, I don't you think you need to worry about the rear end sagging.
You do not have the required permissions to view the files attached to this post.
Posts: 6
Joined: Sun Jul 03, 2005 12:23 am

Post by nufnuf »

hey dude where is that at that hill climb looks sweetttt let us know dude
Posts: 6
Joined: Sun Jul 03, 2005 12:23 am

Post by nufnuf »

hey dude where is that at that hill climb looks sweetttt let us know dude
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Hi

I can sell you Lovells Kings or Dobinsons Coils for $150 a pair.
With any of these brands, the stiffer the coil the less it is likey to sag and the more uncomfortable it becomes and the less body roll you get.

Bilstein shocks $170 each.
Dobinsons shocks $95 each
Procomp shocks $125 each
Everything includes free delivery to your door.


Shane on 0409 593 414
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Post by brooksy »

OnPatrol wrote:My Disco 2 also has airbag rear SLS, fitted with 4x4 Design & Eng kit, OME shocks all around and Dobinson springs for the front. This gives 50mm of lift. With 265/75/16 Cooper STTs there is slight rubbing on the front left. I also have a set of 265/75/16 BFG ATs and they rub on the front left as well. As you can see from the photo there isn't much room under the guards.

With SLS, I don't you think you need to worry about the rear end sagging.
The 265/75/16 Coopers are pretty close to 33" aren't they. Do you know the part/no. for the dobinson f/springs. I take it that you used the nitrocharger shocks ?
Sorry about the 20 questions, just want to be sure. :oops:

cheers

brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Post by brooksy »

4WD Stuff wrote:Hi

I can sell you Lovells Kings or Dobinsons Coils for $150 a pair.
With any of these brands, the stiffer the coil the less it is likey to sag and the more uncomfortable it becomes and the less body roll you get.

Bilstein shocks $170 each.
Dobinsons shocks $95 each
Procomp shocks $125 each
Everything includes free delivery to your door.


Shane on 0409 593 414
Thanks Shane, I will keep you in mind.
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Post by brooksy »

I am going to look into a couple of U.K. sites tonight.
www.rjharvey.co.uk REAR SHOCK TOP MOUNTS
Looks interesting ??

brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Re: Suspension

Post by brooksy »

Mick G wrote:Hi Brooksy

I have the OME shocks and springs all round which gives me a 2" lift. Don't have part numbers to hand but they are the hardest springs OME do for the disco as I have set it up for touring and camping etc. When loaded up, I am very happy with the ride height as there is minimal sag and the handling on and off road is great too. They do a fantstic job when tackling some hard rutted stuff too. I have had them on nearly 12 months now and they are still performing as they did when I first got them. Only thing I don't like is the round town stiffness when the car is empty, but then everything is a compromise and you should be okay with your rear bags. The harshness has been made slightly better by fitting 265/75r16 BFG muds over the factory issue 255/65 - not sure if you would fit 33" without cutting gaurds etc, but do a search as this has been discussed previously. The muds I have come it at just under 32" (31.7" to be exact on one scale I read) and there is zero rubbing either at full lock or full articulation, but it is very close - I had to grind off the end of a bolt in the rear wheel arch.

I'll e-mail you some pics of my car wihout the mud tyres which will give you an idea of ride height, but look at my Avatar also which shows my rear wheel arch with the muds fitted. I have heard good things about the Bilstein's also but also that they are expensive.

Hope this helps and see you on the tracks sometime.

Aye, Mick[/img]
Thanks for the e-mail Mick. I like " on patrol " ( sorry forgot to check name) idea on Dobinson springs.

P.S. $300 is ok for barrier, I will e-mail you that information you wanted.

brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Posts: 151
Joined: Mon Mar 01, 2004 7:00 am
Location: Melbourne

Post by OnPatrol »

brooksy wrote: The 265/75/16 Coopers are pretty close to 33" aren't they. Do you know the part/no. for the dobinson f/springs. I take it that you used the nitrocharger shocks ?
Sorry about the 20 questions, just want to be sure. :oops:

cheers

brooksy
265/75/16 is closer to 32 inches...or 31.6 to be precise. Yes, I have nitrochargers. Call Shane at Wombat 4wd in Ringwood Vic on 03 9870 0699 for the part no's. Shane installed the lift for my Disco, including the CDL.

Anyway, springs are cheap and if you have ACE then it doesn't make sense to have stiffer springs at the front.

I drive a modified Patrol as well, and I drive the Disco as hard as I drive the Patrol and it's still going strong.
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Post by Davidh »

I drive a modified Patrol as well, and I drive the Disco as hard as I drive the Patrol and it's still going strong.
Give it time.... :D
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Post by brooksy »

Davidh hey champ,

What suspension is on yours & who did it if you don't mind me asking ? :D :D
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests