Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
a comprehensive list of Diahatsu 4x4 models
Moderator: Tiny
a comprehensive list of Diahatsu 4x4 models
I did a search and checked the bible with no luck,
can someone direct me to a place that has a comprehensive list of Diahatsu 4x4 models please?
Peter.
can someone direct me to a place that has a comprehensive list of Diahatsu 4x4 models please?
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
FE 1.0l petrol:
F10S short body, softtop
F10SK short body, softtop, steel doors
F10J long body, softtop
F10JK long body, softtop, steel doors
12R 1.6l petrol
F20S short body, softtop
F20SK short body, softtop, steel doors
F20J long body, softtop
F20JK long body, softtop, steel doors
F20JKB long body, resin top, steel doors
F20V metaltop
F25 pickup
DG 2.5l diesel:
F50J long body, softtop
F50JK long body, softtop, steel doors
F50JKB long body, resin top, steel doors
F50V metaltop
F55 pickup
DL 2.8 diesel:
F60J long body, softtop
F60JK long body, softtop, steel doors
F60JKB long body, resin top, steel doors
F65 long body, pick up
Long and short body only differ in rear overhang, wheelbase is the same
There were also different trims, any D in the designations (found on the identification plate in the car) stands for a deluxe version. An M in de designation stands for the 5sp manual transmission.
Parts mostly differ in case of the specific roof types (attaching holes and lips for the folding windscreen)
In 78 there was a restyle of the front (Chrisf20maniac over here has one of the pre 78 models), body panels are not interchangeable
In 82/83 another restyle took place. this only changed the metal grille into a plastic one, but aother parts are stil interchangeable (I've got a late 83 model).
Hope this will be of use.
The other fellas over here can probably complete this list with rockies and ferozas
edit: forgot to mention that seating arrangements were standard only front and the resy could be ordered as an option i guess. I've some drawings with a short model f10 as a 6-seater (benches facing sideways). Boy, would that thing go uphill fully loaded
F10S short body, softtop
F10SK short body, softtop, steel doors
F10J long body, softtop
F10JK long body, softtop, steel doors
12R 1.6l petrol
F20S short body, softtop
F20SK short body, softtop, steel doors
F20J long body, softtop
F20JK long body, softtop, steel doors
F20JKB long body, resin top, steel doors
F20V metaltop
F25 pickup
DG 2.5l diesel:
F50J long body, softtop
F50JK long body, softtop, steel doors
F50JKB long body, resin top, steel doors
F50V metaltop
F55 pickup
DL 2.8 diesel:
F60J long body, softtop
F60JK long body, softtop, steel doors
F60JKB long body, resin top, steel doors
F65 long body, pick up
Long and short body only differ in rear overhang, wheelbase is the same
There were also different trims, any D in the designations (found on the identification plate in the car) stands for a deluxe version. An M in de designation stands for the 5sp manual transmission.
Parts mostly differ in case of the specific roof types (attaching holes and lips for the folding windscreen)
In 78 there was a restyle of the front (Chrisf20maniac over here has one of the pre 78 models), body panels are not interchangeable
In 82/83 another restyle took place. this only changed the metal grille into a plastic one, but aother parts are stil interchangeable (I've got a late 83 model).
Hope this will be of use.
The other fellas over here can probably complete this list with rockies and ferozas
edit: forgot to mention that seating arrangements were standard only front and the resy could be ordered as an option i guess. I've some drawings with a short model f10 as a 6-seater (benches facing sideways). Boy, would that thing go uphill fully loaded
Last edited by elgordomuygrande on Thu Aug 04, 2005 6:23 pm, edited 2 times in total.
smokin' is bad, especially for your curtains
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
That would be the Hijet but i didn't know if there were 4x4 versions
found this though
http://www.best-used-tractors.com/mini_truck.html
found this though
http://www.best-used-tractors.com/mini_truck.html
smokin' is bad, especially for your curtains
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
well excuse me while i get the shoe laces outta my mouthelgordomuygrande wrote:Feel free to addelgordomuygrande wrote:
The other fellas over here can probably complete this list with rockies and ferozas
haha, i didn't bother actually READING ur post, i just did a 'CTR-L + F' for F70 and F75
60 + Turbo, 33"s :armsup:
Thanks for telling me what it was called, I found this.elgordomuygrande wrote:That would be the Hijet but i didn't know if there were 4x4 versions
found this though
http://www.best-used-tractors.com/mini_truck.html
http://www.abtractors.com/HiJet_Mini-truck.htm
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Haha, but now where on the topic, do u know what the later model rockies are , the ifs ones?RockyF70 wrote:well excuse me while i get the shoe laces outta my mouthelgordomuygrande wrote:Feel free to addelgordomuygrande wrote:
The other fellas over here can probably complete this list with rockies and ferozas
haha, i didn't bother actually READING ur post, i just did a 'CTR-L + F' for F70 and F75
Cheers
BTW Pete, you're planning to get one of the little vans? look like great fun!
smokin' is bad, especially for your curtains
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
http://www.best-used-tractors.com/mini_truck.html
I want a container of mini-trucks! Take em racing perhaps
I want a container of mini-trucks! Take em racing perhaps
Fear the mighty Daihatsu!
Being a Suzuki guy I have been looking for a 4x4 Carry for a while but I know were a 4x4 Hijet is so I may have to go to "the dark side"elgordomuygrande wrote: Pete, you're planning to get one of the little vans? look like great fun!
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Just an update guys I have found a 4x4 hijet in top nic (1 owner ) and I have a few more questions relating to this car before I buy it.
1. What engines will bolt up? (twin can/turbo/EFI, ect ect)
2. Does anyone know what the diff ratio is?
3. Is the rear diff intercahangeble with any other Daihatsu?
Thanks guys, any help would be appreciated
Peter.
1. What engines will bolt up? (twin can/turbo/EFI, ect ect)
2. Does anyone know what the diff ratio is?
3. Is the rear diff intercahangeble with any other Daihatsu?
Thanks guys, any help would be appreciated
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
pete,
I don't know if it's useful, but it sure is a nice read.
http://www.xs4all.nl/~mjs/cabover.html
I don't know if it's useful, but it sure is a nice read.
http://www.xs4all.nl/~mjs/cabover.html
You do not have the required permissions to view the files attached to this post.
smokin' is bad, especially for your curtains
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
If anyone wanted that video of "Pimp My Ride", I have it temporarily on my web site here:
http://www.dougfreeze.com/daihatsu/Pimp ... Hi-Jet.avi
It's really big at about 177 MBs but if you want it, there it is.
http://www.dougfreeze.com/daihatsu/Pimp ... Hi-Jet.avi
It's really big at about 177 MBs but if you want it, there it is.
[url=http://dougfreeze.com/daihatsu]DougFreeze.com/Daihatsu[/url]
Well I reckon you would be able to have a look at some of the charade or micra motors.....droopypete wrote:Being a Suzuki guy I have been looking for a 4x4 Carry for a while but I know were a 4x4 Hijet is so I may have to go to "the dark side"elgordomuygrande wrote: Pete, you're planning to get one of the little vans? look like great fun!
Peter.
Or a 660 twin cam turbo from you know what : )... Just coz you are switching to the dark side doesnt mean you can't use zook parts.
What are you planning to use for gearing, tire etc... Maybe a bit off topic sorry.
I like your thinking pete, something different will be made. A guy over here is building a L300
Anyway what the hell am I in this forum for ..... it always ends in tears!
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
I have always liked the look of haflingers and I thought a Suzuki Carry van or Hijet van would be a good base to cut down, put in a pair of sierra N/T diffs a few diff locks a set of 31" tyres and a few other things
I have been plotting this for many years and the cruncher was when I was in Cairns a few months ago and saw a Mitsubishi L300 4x4 van cut down into a ute!! shit yeah, I want one, now I have found a 4x4 Hijet, I can not afford to buy it oh well maybe in a few years.
Peter.
I have been plotting this for many years and the cruncher was when I was in Cairns a few months ago and saw a Mitsubishi L300 4x4 van cut down into a ute!! shit yeah, I want one, now I have found a 4x4 Hijet, I can not afford to buy it oh well maybe in a few years.
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Who is online
Users browsing this forum: No registered users and 3 guests