Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheels & stud patterns

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 27
Joined: Mon Jun 27, 2005 2:05 pm
Location: Melbourne

Wheels & stud patterns

Post by igould »

Is the Triton stud pattern common to all Jap utes?
Are there any others that use the same stud pattern?

Thanks,
Ian
77 Rangie Classic 4.4v8 manual, 2" spring lift, 2" body lift
97 Disco 3.9v8 manual
00 Disco Td5 auto
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

The Pajero stud pattern is the same as Toyota and Nissan. It's just the offset of the rims that vary AFAIK.
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

The diameter of the centre hole varies too. Most people don't care, as long as the hole fits over the hub. Technically, it's supposed to be a close fit, as the center of the hub is supposed to carry the weight of the vehicle, not the wheel studs.

Cheers,

Scott
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 3 guests